[GUIDE] Installing Despertar del Cementrio v6 - Update to 4.01M33 via Pandora
[GUIDE] Installing Despertar del Cementerio v6
This guide will guide you through the process of installing Despertar del Cementrio v6
Guide written by Bubbletune and Moose Island of QJ
This guide will work with both a PSP Slim and Classic!
IntroductionIn this guide we will explain the installation of Desperater del Cementerio v6. This will allow you to install 4.01 M33-2 directly on any PSP, providing that you have a homebrew-enabled PSP to make it on in the first place.
It will allow numerous things, installing both the 4.01 offical firmware and 4.01 M33, unbricking any PSP, testing 4.01 M33 directly from the memory stick, requesting information about the PSP's hardware, and more.
If you've already got TimeMachine installed, it will integrate seemlessly, if you don't and want it, we suggest installing it before installing DDCv6, if you want to add TimeMachine to DDCv6 later, look at the TimeMachine guide.
WARNING: A Pandora's battery will NOT work on PSP's with the TA-088 v3 motherboards. However, trying will not harm your PSP in any way.
Converting the battery Extract the Pandora Installer Revision 4 you downloaded to your dekstop. Enter the extracted folder and copy 'pan3xx' to X:/PSP/GAME on your memory stick. Launch it via GAME > Memory stick. Choose either the option 'OK' or 'Do not show this again' at the credits screen. Scroll down to 'Battery options' and choose 'Make battery Pandora'. When done, exit the application.
Installing DDCv6 If the file X:/TM/config.txt doesn't exist, create one and leave it blank. You could get rid of DDCv5 first by removing the X:/TM/DDCv5 folder. If you have any PTF themes enabled, disable them to prevent issues. Extract the downloaded 'despertar6.rar' to your dekstop. Copy the 'DC6' folder to 'X:/PSP/GAME/'. Copy the downloaded 401.PBP to the root of your memory stick. Launch the installer from GAME > Memory stick. Press cross to start the installation. Choose what button you want to use to boot into DDCv6 later. Press cross to start the installation. You'll have choose what button you want to use to boot into DDCv6 later, do so. If the installer shows an error at 99%, you'll have to reformat your memory stick.
Backup all data on your memory stick, it will get lost when formatting. Launch the Hellcat tool from the last section via GAME > Memory Stick. Scroll down to the 'Memstick and MS-IPL options' and choose 'Repartition and format MemStick'. Press L+R+X to confirm the re-formatting of the memory stick (all data will be lost). Restore your backup and repeat the DDCv6 installation steps. Sit back and wait for the installation to finish.
Using Your Battery Turn off your PSP fully. Start your PSP whilst holding the button you chose during installation. Select one of the options!
Credits Bubbletune - Writing this guide
Moose Island - Writing this guide
Dark_AleX - Creating DDCv6
Hellcat - Creating Pandora Installer