Notice: Once again,Please Don't update your firmware to V3.55. Keep it stay in V3.5 or below!
Before the downgrade job, please download some files and prepare sth in advance!
1. DGF.rar (167.48 MB
Including the modified SSP3.41 and Lv2diag.self Lv2diag.self FILE FILE1 and2
Including the upgrade and downgrade.bin P3GO is to put your PS3 in factory / service mode.
3.A clean pen formatted to fat32
4. P3Go. a trustworthy site for you. P3GO
Step 1: Plug the P3Go to computer.
Step 2: Update the P3Go firmware.
1.Open the microSD folder which shows in the picture.
Copy the file that is inside update.bin the downgrade.rar-20101208-2 file to the microSD like this:
Unplug P3GO and then plug it again, you will see this picture.
Copy the file downgrade.bin P3GO to a drive like this:
After that, uodate is done.
Turn off the PS3 console completely (FAT - The switch in the back and the SLIM with the power cable of the completely removed) then plug your P3GO.
Connect the PS3, Power + Eject quickly and you will log in factory / service mode (see the picture)
Just power off the PS3 via XMB!
Now using the pen to fat32 formatted Will you need to copy the modified SSP 341 for 341 from DGF and Lv2diag.self FILE 1 to clean the pen:
Plug the PEN to the USB PORT that is the most right in your console like the photo:
Power on the console and you can't see anything in the screen, it will take about 3 mins to flash the firmware V3.41, then PS3 will power off automatically !
Now delete allof the files in PEN FAT32 and copy the Lv2diag.self FILE 2 to the pen:
Connect the pen again like this:
Power on the console and 10 seconds later the console will power off again!
After that , you will find the version is V3.41.
Now just rename or delete the file from downgrade.bin P3GO and You Can use it to jailbreak your PS3!
Welcome P3GO join the downgrade family,so now nearlly all of the jailbreak items can support downgrade now,including PS3 break,P3GO,USB break,P3HUB,E3 card rerader.....there will be more and more tutorials for you!