Join Date: Oct 2005
Location: OMG where AM I!?!?!?!?
Posts: 820
|
I would like to share some knowledge and a simplified guide to getting this to work. It might look large but its actually really simple if you have a brain  (Tedzero your guide was good but a little complicated, even for me  )
This guide is in 5 easy steps.
Step 1: Download the TedZero Browser an unzip to your desktop.
Step 2: Drag and drop the files located in the PSP files folder to your psp. CONFIG1 goes into your root (NOT THE PSP FOLDER. When you access the memory stick you should see a folder called psp. Put it right there. It should look like this I:\CONFIG1) and TEDZEROCopier_v2.2 and TEDZEROCopier_v2.2% goes into PSP/GAMES/ folder.
Step 3: Heres the part where people get confused. Make a static IP address for your psp, and get your PC's Ip address. Go to any connection that you have (not for a web browser exploit) for your network and press triangle and click Test Connection.
Take down the following:
The IP address
Subnet Mask
Default Router
Primary DNS
Secondary DNS
Now to make the Static IP:
Create a new Connection (in this case we'll call Static)
and scan for your Home Network, scroll over untill you get to Address Settings, click on custom, then hit manual for IP Adress Settings, then type in the information you took down before. For proxy server do not use. Save and test the connection.
Now for the PC.
Click on start, Run.
Type in cmd.
A command prompt should open up.
Type in "ipconfig" (without quotes)
Write down the number it gives you on the IP address line.
Step 4: Edit the CONFIG1 file to change the following lines from:
;SERV= 192.168.1.2;
;RCON= Conn;
To:
;SERV= xxx.xxx.x.x <--- this refers to your PC's IP address;
;RCON= Static --> the name of your new static ip connection on your psp ( in this case Static)
Step 5: Review everything and make sure its ok and start up the server on your computer and open up the Browser on your psp. Cycle through everything and you should be in.
Extra steps for pass config:
To change the password you need to do 2 things:
Edit the CONFIG1 file
And Edit the sconfig file.
To edit the CONFIG1 file:
Open up the CONFIG1 file and on the line where it says:
;SPWD= teddy;
Change it to:
;SPWD= xxxxxx--> whatever your new password will be, it should be alpha numeric, only numbers and characters are allowed and max size is 14 characters.
To change the sconfig file:
Open up the sconfig file and change the line that reads:
;PASSWORD= teddy;
To:
;PASSWORD= xxxxxx---> what ever you put in the CONFIG1 file for your password.
Steps for editing the TedZero .gfx file:
To edit the .gfx file you would have to open it up with either notepad or any other program. (I personnally use ConText which is a programing text editor.)
When you open it it should look something like this:
;D_COLOR 66,99,136;
;TEXT_COLOR 255,255,255;
;SEL_COLOR 0,0,255;
;MENU_COLOR 0,0,0;
;BOX_COLOR 66,99,136;
;BG_COLOR 0,0,0;
;BG_IMAGE ms0:/Tedzero/tedzero.bmp;
Now i will go in depth on how to edit these variables:
;D_COLOR 66,99,136;
;TEXT_COLOR 255,255,255;
;SEL_COLOR 0,0,255;
;MENU_COLOR 0,0,0;
;BOX_COLOR 66,99,136;
;BG_COLOR 0,0,0;
These lines can only be edited with the proper code number for the corressponding color. The way how i figure out the code is i go to Microsoft Paint and click on colors and edit colors. Then i go into define custom colors and there are 3 boxes on the bottom left hand side of the screen reading:
Red:
Green:
Blue:
In those boxes you type in a number and it will show you the color you entered. I mess around with the numbers untill i get to the one i want. I Write the code and I replace them into the .gfx file.
An example would be:
Instead of:
;D_COLOR 66,99,136;
I replace it with:
;D_COLOR 22,35,199
Replacing them goes like this:
;D_COLOR (red),(green),(blue)
Once you know how to use that you can start replacing the variables with numbers of your own.
NOTE: Leave menu color 0,0,0 if you want it to be transparent.
Also leave BG color at 0,0,0. If not your background will not show right!
Now to change the Background:
In the TedZero folder thats in the root of your Memory Stick you should see a file called tedzero.bmp (it might not say bmp but trust me it is).
That is the background of the browser (currently held by Ralside set 1).
In order to change it you must get either a bmp, or convert a picture to bmp and size it to 480 X 230 24 bit bmp.
Then you can either rename it to tedzero or edit the .gfx file to the name of the name of the new bmp.
IE:
From:
;BG_IMAGE ms0:/Tedzero/tedzero.bmp;
To:
;BG_IMAGE ms0:/Tedzero/InhumanElmo.bmp;
Now with your new knowledge of editing the .gfx file and the background you can make themes!
Edit: To pull off an entire folder or exit the program hit triangle to bring up the menu. Also there is a file file limit of 255 in each folder. Otherwise the server could crash. That wouldn't be so fun if your half way across the world and want your music!
And thats it it. The program should connect and you can start loading up your psp without even using a usb cord in style!!
Thanks TedZero for the program!
__________________
[SPOILER="For PSP History"]1.50 > 1.52 > 2.00 > 1.5 > 1.5 (POC CF) > 1.5 (Harleyg) > 1.5 (Casual) > 3.03 OE-A > 3.03 OE-C[/SPOILER]
Check it out: [URL="http://youtube.com/watch?v=xNVPKM07TWs&mode=related&search="]Pen Spinning[/URL]
Last edited by InhumanElmo; 11-03-2005 at 12:14 PM..
|
Hello Folks
