QJ.net Game Discussion - PSP, Xbox, Wii, PS3, PSP Homebrew, and PSP Guides

**AhMan** · 02-04-2006, 08:01 PM

Version 0.8 is released with the following new features:
1) Support shortcut remote lists which allows you to switch directly from 1 remote to the other by pressing START button. Refer to "Panasonic TV.rdf" for details.
2) Support Macro pause time. Refer to "Panasonic TV.rdf" for details.
3) Bug fix for missing files if the file attribute is set to read-only.

Download link:
http://www.ahman.co.nr/

**Mr530** · 02-04-2006, 08:11 PM

sweet thanks

edit: nvm i figured it out. i just assumed they worked automaticly because it said somethinga bout it in the description.

lol_XD · 02-04-2006, 08:22 PM

nice remote but i was wondering how far do you have to be for the psp to work...4..5 feet?

**AhMan** · 02-04-2006, 08:26 PM

Quote:

Originally Posted by lol_XD

nice remote but i was wondering how far do you have to be for the psp to work...4..5 feet?

That depends on the devices. I was able to control a Pentax Optio camera from 25 feet away.

**Kick In Da D0oR** · 02-04-2006, 09:05 PM

There are alot more codes on the remotecentral.com site hidden in the ccf file section located HERE

You will need the CCF Tools software to get your codes out of the ccf file. located HERE
When you downlod and install the software, click ccf decompiler.exe file and locate the ccf file u downloaded from the link above. Its suppose to extract to a .xml file, same location u downloaded the ccf file, u will then find more codes in the xml.
I was able to control the rest of my devices from this section of the site.

like i said in an earlier post if u cannot find ur model on the site , look for a model that has a similar name, or find out if the remote for that device was used on others. im pretty sure u can find codes for ur components, just have to be patient to look for them.

**Mr530** · 02-04-2006, 09:10 PM

Is it possible to combine commands? for example if I wanted to go to channel 17 is there anyway i could assign CIRCLE the code for number 1 then shortly after number 7 so that i could go to a specific channel with one button (that is already preprogrammed in the rdf)

THANKS!

sikkwidditt · 02-04-2006, 09:15 PM

Is 2.00 compatible?

**AhMan** · 02-04-2006, 10:08 PM

Quote:

Originally Posted by Mr530

Is it possible to combine commands? for example if I wanted to go to channel 17 is there anyway i could assign CIRCLE the code for number 1 then shortly after number 7 so that i could go to a specific channel with one button (that is already preprogrammed in the rdf)

THANKS!

Yes, this is possible via Macros. You can define upto 20 IR codes per key. You can refer to the sample "Panasonic TV.rdf" for details.

**AhMan** · 02-04-2006, 10:09 PM

Quote:

Originally Posted by sikkwidditt

Is 2.00 compatible?

The iR Commander requires kernel mode access, so 2.0 isn't possible at the moment.

**AhMan** · 02-04-2006, 10:10 PM

Quote:

Originally Posted by Kick In Da D0oR

There are alot more codes on the remotecentral.com site hidden in the ccf file section located here http://www.remotecentral.com/cgi-bi...devices&br=&fc=

You will need the CCF Tools software to get your codes out of the ccf file. located here http://www.remotecentral.com/cgi-bi...ccfprograms&fc=

When you downlod and install the software, click ccf decompiler.exe file and locate the ccf file u downloaded from the link above. Its suppose to extract to a .xml file, same location u downloaded the ccf file, u will then find more codes in the xml.
I was able to control the rest of my devices from this section of the site.

like i said in an earlier post if u cannot find ur model on the site , look for a model that has a similar name, or find out if the remote for that device was used on others. im pretty sure u can find codes for ur components, just have to be patient to look for them.

Very good tutorial, thanks!

**Jonny202003** · 02-05-2006, 12:01 AM

Apparently, the website links are out dated, so no codes for me

You should create an app for psp that reads the IR commands into a rdf file or a text file.

sikkwidditt · 02-05-2006, 01:17 AM

thanks Ahman!

chody · 02-05-2006, 02:00 AM

can someone please tell me how convert a .rdf file from a .ccf file, the guide on ahman's site didnt make sense
EDIT: found out, but when i try to run it i says something along the lines of "unknown key on line 39" or something i checked line 39 in notepad and couldnt find the typo

**Takazeki** · 02-05-2006, 04:02 AM

w00t! Next step ->learning option :P

TPTaylor · 02-05-2006, 04:09 AM

Quote:

Originally Posted by Kick In Da D0oR

There are alot more codes on the remotecentral.com site hidden in the ccf file section located here http://www.remotecentral.com/cgi-bi...devices&br=&fc=

You will need the CCF Tools software to get your codes out of the ccf file. located here http://www.remotecentral.com/cgi-bi...ccfprograms&fc=

.

(link's don't work)i think you shortened the link to have the ...'s in it. could you please post the working links? thanks.

piggelin · 02-05-2006, 04:09 AM

lol i actually downgraded just for trying the remote, worked very easly and nice on my samsung tv and dvd. well, time to upgrade back to 2.0 and swapping ms duos :P

**Angelus3K** · 02-05-2006, 05:24 AM

Anyone found a Sky+ Remote hex codes?

**Kick In Da D0oR** · 02-05-2006, 07:52 AM

Quote:

Originally Posted by pauldude550

(link's don't work)i think you shortened the link to have the ...'s in it. could you please post the working links? thanks.

Oh sorry,
CCF Files Here

CCF Tools Here

Killa E · 02-05-2006, 09:01 AM

Will it ever be compatible with FW 2.60?

**Vilinh** · 02-05-2006, 12:00 PM

Nope.

**Kick In Da D0oR** · 02-05-2006, 03:16 PM

Quote:

Originally Posted by chody

can someone please tell me how convert a .rdf file from a .ccf file, the guide on ahman's site didnt make sense
EDIT: found out, but when i try to run it i says something along the lines of "unknown key on line 39" or something i checked line 39 in notepad and couldnt find the typo

Make sure the commands are all in High Caps ExAMple:
TRIANGLE=Power oN
SQUARE=Power Off

&

Make sure when combing 2 buttons or 2 comands, u must use underscore not a hyphen Example:
L_TRIANGLE=Power On
R_TRIANGLE=Power Off

**rangedunits** · 02-05-2006, 06:21 PM

Does triple combination work?, L_R_TRIANGLE

4x

L_R_TRIANGLE_CROSS ?

**Jonny202003** · 02-05-2006, 09:25 PM

Can someone find the ccf file for the HTR-5650 receiver? i got everything else i need except that one! lol please someone!

**AhMan** · 02-06-2006, 03:03 AM

Quote:

Originally Posted by rangedunits

Does triple combination work?, L_R_TRIANGLE

4x

L_R_TRIANGLE_CROSS ?

Only the keys listed in the sample "Panasonic TV.rdf" works. Example, LR_TRIANGLE, etc, works, but LR_TRAINGLE_CROSS doesn't. I think 48 keys should be sufficient. It's even more than my Marantz universal remote.

**digihoe** · 02-06-2006, 08:06 AM

Quote:

Originally Posted by AhMan

Only the keys listed in the sample "Panasonic TV.rdf" works. Example, LR_TRIANGLE, etc, works, but LR_TRAINGLE_CROSS doesn't. I think 48 keys should be sufficient. It's even more than my Marantz universal remote.

Will you add in the Vol+/- buttons too on the PSP? Would be nice if those could be used just for that function...

Great work, keep it up!

**Master-Chief** · 02-06-2006, 08:40 AM

Does anyone know which remote code will work for this TV?:

http://www.circuitcity.com/ssm/Panas...oductDetail.do

It's not listed on the site, and I've tried a couple other ones that look similar, but none worked. :sad:

**Kick In Da D0oR** · 02-07-2006, 11:20 AM

Quote:

Originally Posted by Master-Chief

Does anyone know which remote code will work for this TV?:

http://www.circuitcity.com/ssm/Panas...oductDetail.do

It's not listed on the site, and I've tried a couple other ones that look similar, but none worked. :sad:

Try in this Forum

Ahman,do u mind If I make a request, when highlighting over the rdf files in the main page is it possible to have a custom picture show up for that file on the right side of the screen. Its not important , just eyecandy.

**AhMan** · 02-07-2006, 06:10 PM

Quote:

Originally Posted by Kick In Da D0oR

Try in this Forum

Ahman,do u mind If I make a request, when highlighting over the rdf files in the main page is it possible to have a custom picture show up for that file on the right side of the screen. Its not important , just eyecandy.

This feature isn't difficult, but you may encounter frequent pause during scrolling and the system is trying to load bitmaps.

Just a little update, I'm now working on launching another game/homebrew within iR Commander, so that you can use a hot key to switch between iR Commander and game/homebrew. Initial test version doesn't work too well due to memory constraint.

**Kick In Da D0oR** · 02-08-2006, 06:10 AM

Quote:

Originally Posted by AhMan

This feature isn't difficult, but you may encounter frequent pause during scrolling and the system is trying to load bitmaps.

Just a little update, I'm now working on launching another game/homebrew within iR Commander, so that you can use a hot key to switch between iR Commander and game/homebrew. Initial test version doesn't work too well due to memory constraint.

I forgot to add if its possible to associate sounds with highlighting and clicking a file. Just tryin to get a more digital feel with the program. I have other requests but definately dont want to be a nuissance, as they are not important features.

gnatman · 02-08-2006, 01:06 PM

I have a version 1.0 PSP, and would like to try this program out. Has anyone had any luck getting this to work on 1.0s? Or does anyone know why it wouldn't work on a 1.0?

I haven't been downloading any PSP apps for a few months now, but I think I remember being able to copy the large eboot into the data directory and play most 1.5 apps on my 1.0, but these eboots don't seem to be set up that way. So is there another program that can combine them? Or am I just SOL?

02-04-2006, 08:01 PM	#1
AhMan Retired PSP Developer Join Date: Jan 2006 Location: Hong Kong Posts: 213 Trader Feedback: 0	PSP iR Commander 0.8 is released Version 0.8 is released with the following new features: 1) Support shortcut remote lists which allows you to switch directly from 1 remote to the other by pressing START button. Refer to "Panasonic TV.rdf" for details. 2) Support Macro pause time. Refer to "Panasonic TV.rdf" for details. 3) Bug fix for missing files if the file attribute is set to read-only. Download link: http://www.ahman.co.nr/

02-04-2006, 08:11 PM	#2
Mr530 Join Date: Jul 2005 Posts: 53 Trader Feedback: 0	sweet thanks edit: nvm i figured it out. i just assumed they worked automaticly because it said somethinga bout it in the description. Last edited by Mr530; 02-04-2006 at 08:15 PM..

02-04-2006, 09:05 PM	#5
Kick In Da D0oR Join Date: Jan 2006 Posts: 52 Trader Feedback: 0	There are alot more codes on the remotecentral.com site hidden in the ccf file section located HERE You will need the CCF Tools software to get your codes out of the ccf file. located HERE When you downlod and install the software, click ccf decompiler.exe file and locate the ccf file u downloaded from the link above. Its suppose to extract to a .xml file, same location u downloaded the ccf file, u will then find more codes in the xml. I was able to control the rest of my devices from this section of the site. like i said in an earlier post if u cannot find ur model on the site , look for a model that has a similar name, or find out if the remote for that device was used on others. im pretty sure u can find codes for ur components, just have to be patient to look for them. Last edited by Kick In Da D0oR; 02-05-2006 at 07:55 AM..

02-05-2006, 02:00 AM	#13
chody Join Date: Jul 2005 Posts: 8 Trader Feedback: 0	can someone please tell me how convert a .rdf file from a .ccf file, the guide on ahman's site didnt make sense EDIT: found out, but when i try to run it i says something along the lines of "unknown key on line 39" or something i checked line 39 in notepad and couldnt find the typo Last edited by chody; 02-05-2006 at 03:39 AM..

02-04-2006, 08:22 PM	#3
lol_XD Join Date: Jan 2006 Posts: 10 Trader Feedback: 0	nice remote but i was wondering how far do you have to be for the psp to work...4..5 feet?

02-04-2006, 09:10 PM	#6
Mr530 Join Date: Jul 2005 Posts: 53 Trader Feedback: 0	Is it possible to combine commands? for example if I wanted to go to channel 17 is there anyway i could assign CIRCLE the code for number 1 then shortly after number 7 so that i could go to a specific channel with one button (that is already preprogrammed in the rdf) THANKS!

02-04-2006, 09:15 PM	#7
sikkwidditt Join Date: Jan 2006 Posts: 27 Trader Feedback: 0	Is 2.00 compatible?

02-05-2006, 12:01 AM	#11
Jonny202003 Join Date: Oct 2005 Posts: 255 Trader Feedback: 0	Apparently, the website links are out dated, so no codes for me You should create an app for psp that reads the IR commands into a rdf file or a text file.

02-05-2006, 01:17 AM	#12
sikkwidditt Join Date: Jan 2006 Posts: 27 Trader Feedback: 0	thanks Ahman!

02-05-2006, 04:02 AM	#14
Takazeki Join Date: Oct 2005 Posts: 54 Trader Feedback: 0	w00t! Next step ->learning option :P

02-05-2006, 04:09 AM	#16
piggelin Join Date: Oct 2005 Posts: 28 Trader Feedback: 0	lol i actually downgraded just for trying the remote, worked very easly and nice on my samsung tv and dvd. well, time to upgrade back to 2.0 and swapping ms duos :P

02-05-2006, 05:24 AM	#17
Angelus3K Join Date: Sep 2005 Location: Newcastle, UK Posts: 402 Trader Feedback: 0	Anyone found a Sky+ Remote hex codes?

02-05-2006, 09:01 AM	#19
Killa E Join Date: Feb 2006 Posts: 1 Trader Feedback: 0	Will it ever be compatible with FW 2.60?

02-05-2006, 12:00 PM	#20
Vilinh Join Date: Nov 2005 Posts: 119 Trader Feedback: 0	Nope.

02-05-2006, 06:21 PM	#22
rangedunits Join Date: Jun 2005 Posts: 143 Trader Feedback: 0	Does triple combination work?, L_R_TRIANGLE 4x L_R_TRIANGLE_CROSS ?

02-05-2006, 09:25 PM	#23
Jonny202003 Join Date: Oct 2005 Posts: 255 Trader Feedback: 0	Can someone find the ccf file for the HTR-5650 receiver? i got everything else i need except that one! lol please someone!

02-06-2006, 08:40 AM	#26
Master-Chief Join Date: Jul 2005 Posts: 530 Trader Feedback: 0	Does anyone know which remote code will work for this TV?: http://www.circuitcity.com/ssm/Panas...oductDetail.do It's not listed on the site, and I've tried a couple other ones that look similar, but none worked. :sad:

02-08-2006, 01:06 PM	#30
gnatman Join Date: Feb 2006 Posts: 2 Trader Feedback: 0	I have a version 1.0 PSP, and would like to try this program out. Has anyone had any luck getting this to work on 1.0s? Or does anyone know why it wouldn't work on a 1.0? I haven't been downloading any PSP apps for a few months now, but I think I remember being able to copy the large eboot into the data directory and play most 1.5 apps on my 1.0, but these eboots don't seem to be set up that way. So is there another program that can combine them? Or am I just SOL?

QJ.net Game Discussion - PSP, Xbox, Wii, PS3, PSP Homebrew, and PSP Guides

PSP iR Commander 0.8 is released