Psp official firmware 5.01

[bboyjcm]

PSP OFFICIAL FIRMWARE 5.01 IS OUT!!!!

Here it's the changelog:

The main function which is renewed with system software version 5.01

Using PSP®, when downloading the contents from PlayStation®Store, when you use the memory stick duo * of 8GB and 16GB, “empty capacity is insufficient”, that the trouble which has the case to which message can be indicated, cannot download was corrected.

* From PS3®, or the personal computer it accesses PlayStation®Store, when downloading the contents, the above-mentioned problem does not happen.

Download Link:
Click Here To Download It

Source: http://uk.babelfish.yahoo.com/transl...rUrl=Translate

[Erland]

Here's how to access the PSN without using 5.01 technically..

Want an unoffical version of 5.01 M33? , here you go!!!

1. Download the official 5.01 update data

2. Rename the official 5.01 update data from UPDATE.PBP to 5.00.PBP

3. Lunch the 5.00 M33 installer.

4. Press X to verify the 500.PBP

5. After the verification is done, before pressing X to start the update process (Remove your MS, use a USB card reader or another PSP connect it to your PC.

6. Copy the 5.01 update data which you had renamed to 5.00.PBP in then UPDATE folder (This will overwrite the original 5.00.PBP in the UPDATE folder)

7. Put the MS in your PSP again, press X to install the Unofficial 5.01 M33

NOTE: you will need both 5.00 & 5.01 update data

Big ups to Fadil Team for the fix....

[dudash]

Originally Posted by Erland

Here's how to access the PSN without using 5.01 technically..

Want an unoffical version of 5.01 M33? , here you go!!!

1. Download the official 5.01 update data

2. Rename the official 5.01 update data from UPDATE.PBP to 5.00.PBP

3. Lunch the 5.00 M33 installer.

4. Press X to verify the 500.PBP

5. After the verification is done, before pressing X to start the update process (Remove your MS, use a USB card reader or another PSP connect it to your PC.

6. Copy the 5.01 update data which you had renamed to 5.00.PBP in then UPDATE folder (This will overwrite the original 5.00.PBP in the UPDATE folder)

7. Put the MS in your PSP again, press X to install the Unofficial 5.01 M33

NOTE: you will need both 5.00 & 5.01 update data

Big ups to Fadil Team for the fix....

erm...
i actually found this out myself a while ago..
and have posted it on my website,
and submitted it to QJ as a news post..
guess we both found it out..

[N3M3515]

What if you already installed 5.00 M33 before this method was posted? I get: "This update or a higher one was already applied".

[karyuudo]

Originally Posted by N3M3515

What if you already installed 5.00 M33 before this method was posted? I get: "This update or a higher one was already applied".

Yeah I have the same problem. Hopeing that someone can give me an answer on this too. If anyone can help, please post the answer. Thanks very much!

[Sullivan]

Originally Posted by Erland

Here's how to access the PSN without using 5.01 technically..

Want an unoffical version of 5.01 M33? , here you go!!!

1. Download the official 5.01 update data

2. Rename the official 5.01 update data from UPDATE.PBP to 5.00.PBP

3. Lunch the 5.00 M33 installer.

4. Press X to verify the 500.PBP

5. After the verification is done, before pressing X to start the update process (Remove your MS, use a USB card reader or another PSP connect it to your PC.

6. Copy the 5.01 update data which you had renamed to 5.00.PBP in then UPDATE folder (This will overwrite the original 5.00.PBP in the UPDATE folder)

7. Put the MS in your PSP again, press X to install the Unofficial 5.01 M33

NOTE: you will need both 5.00 & 5.01 update data

Big ups to Fadil Team for the fix....

WOW, thats a wonderful exploit, nice post.

[mohaas05]

Naturally it would work, the only files that changed were the version.txt and one prx.

[Erland]

you have to downgrade to 4.01 or something else and then try to install it.

However DA says not to do this. Just install 5.00 M33-2 and then swap out the 1 prx and the version.txt and your good.

[shortboy]

Originally Posted by Erland

you have to downgrade to 4.01 or something else and then try to install it.

However DA says not to do this. Just install 5.00 M33-2 and then swap out the 1 prx and the version.txt and your good.

What? No, all you gotta do is dump 5.01 using the current PSARdumper and just grab the version.txt and copy that over the version.txt in your flash0...

It'll still be useless, though, as you said..since he's fixing that in 5.00 M33-3.

[izzat_mz]

err what if..i already upgrade to 5.01 ofical, and then only i know i need to do this. then how? do i need to downgrade it back or just follow this instruction?
me newbie~~lol~