Modifications of Dark_Alexs Custom Firmware POC
c5cha7s L-Trigger Autoboot
Runs the homebrew autoboot if you hold the L-Trigger.
Custom Firmware - The proof of concept
All In One Custom firmware module by Zettablade
Features:
-Takes screenshots with the note button
-Auto USB (just plug it in and it connects automaticaly)
-Overs clocks the CPU to 333/333/166 for speed
All In One Custom firmware module - Ver 0.01a released!!!
CASUAL v2 by LordSturm
This autoloads homebrew specified in the config file unless you hold the L-Trigger. The recovery screen also looks alot better. Now in V2 loads more features.
- BUG FIXED! - Shell Style and ModChip Style now function correctly!
- X-Flash is now loaded using simply "X" and now loads from "ms0:/CASUAL/XFLASH/eboot.pbp"
- In Normal or Shell mode, you can opt to load DevBoot.pbp instead by holding O during that boot.
- "D-Pad DOWN" is now set to totally disable the mod, it acts like theres no config.txt file.
- Uninstaller fixed, now actually removes nameplate, so install again then uninstall if problems occur.
- Recovery mode is now R again...
- In recovery mode, you can press L+R+Start to start auto format. ( Auto re-install 1.50. )
- Holding X+DpadDown will execute XFlasher, just incase you messed up with it... ( WON'T repair. )
- Intergrated PROTECTED mode, and DEVHOOK modes, require "reboot.bin" and "Dumps" on MS.
- NEW BOOT STLYES! Normal, Shell and Modchip
- Normal boots 1.50 unless L is held, then assigned homebrew loads.
- Shell loads assigned Shell always, with no conditions, allows Xflash/Recovery...
- Modchip loads latest devhook configuration, unless interupted with L.
- For saftey reasons, you may not enter PROTECTED/DEVHOOK versions of 1.50 by DEFAULT yet.
|_ It is required to hold down UP, or Triangle, respectivly...
- 2 Devhook config files included, required for protected and devhook modes.
- The Configuration menu can now be brought up by pressing SELECT, and loads by default once.
- vshmain_bak.prx is no longer created, nor used. ( Useless feature. )
- Holding DOWN will revoke ALL modifications, ie. KXPLOIT etc. but allow Autoboot...
- Hold UP for protected mode, and Triangle for Devhook enhancement mode.
- Holding L will only skip autoboot, mods will load. ( Vary's upon styles. )
- Holding Triangle or UP bypasses all other autoboot's, but all mods are loaded.
- NAMEPLATE Appears in About, refrence for instructions etc.
- Unflasher intergrated into Configrator, will close confiurator.
http://localhost.geek.nz/crap/CASUAL_v2_FIX.zip
Harleygs modification V2!!
Complete overhaul of the recovery screen, includes options to change the clock speed and one to remove the custom firmware completely. No need to remove the current custom fw to update.
Whats new in V2:
- Booting with "HOLD" on goes into configuration and recovery mode.
- Booting with wlan switch down goes into devhook.
- Booting with wlan switch up goes into XMB.
- Booting while holding X will launch the autoboot eboot set in config.txt.
- Boot manager inside the configuration and recovery mode can return to XMB and devhook.
- A few more bug fixes.
Probably the best mod going.
Download Here
-XxPsPmadxX & Mooser Custom Firmware Patch v0.25b-
This release brings a New Recovery Mode with GUI that is fully
Customizable. You can edit the GUI your self and give it the
look you want.
-XxPsPmadxX & Mooser Custom Firmware Patch v0.25b-
MortuuS edit
This one has 3 different options for booting:
-Default boots the homebrew defined in the config
-XMB will autoboot the homebrew you select, unless you hold left trigger while it's booting.
-HB it autoboots to the XMB, unless you hold down the left trigger while it's booting.
Check the readme for more information.
Custom Firmware - The proof of concept
Download link has gone off that post, can someone give me a link?
PSP Audio Recorder Beta
http://dl.qj.net/PSP-Audio-Recorder-...6935/catid/140
This allows you to record audio from a UMD or homebrew using L+R+Circle to begin recording and L+R+Square to stop recording.
It saves the recording as a WAV file in PSP/Music.
MP3 Plugin V2 by Slasher
This allows you to listen to mp3s ANYWHERE in the XMB!
Currently supports up to 100 songs in the ms0:/PSP/MUSIC/ folder!
- You can now change the CPU speed if you wish to get rid of any lag you may experience.
- HOME = Activate the module
- HOME + LTRIGG = Switch song(to the left)
- HOME + RTRIGG = Switch song(to the right)
- HOME + UP = Stop current MP3
- HOME + SQUARE = Pause/Unpause
Known Bugs -
- Make sure to stop your current song before loading up a homebrew or UMD, else crashes.
- When exiting out of USB mode, music may mess up. Just switch the current song to fix that.
Place the mp3XMB folder(and all its contents) in the ROOT (ms0:/(here)). This is very important! It MUST be in the root. Then, just simply point the P.O.C. Custom Firmware to load the RUNMEmp3.prx. ex) loadmodule0 = "ms0:/mp3XMB/RUNMEmp3.prx".
The following buttons are configurable.
HOME, UP, RIGHT, DOWN, LEFT, START, SELECT, TRIANGLE, CIRCLE, CROSS, SQUARE, LTRIGGER , RTRIGGER.
http://www.sendspace.com/file/it89kc
VSHExtender
VSHExtender v0.1 partially based on Booster's code bur was rewritten for fw1.5. The developer suggests that this application be used with Dark_AleX's custom firmware or any custom firmware which allows users to add external modules (Harleyg's counted).
- Press HOME + SELECT in the XMB to change the CPU and GPU speeds, steps are 133/66, 222/111, 266/133, and 333/166
- Press HOME + CIRCLE in the XMB to change the CPU speed to 30MHz and the GPU to 50MHz. This makes the XMB become a little laggy but is fine for playing AT3 music or AVC video as this is hardware decoded
- Press HOME + L TRIGGER to execute ms0:/PSP/SYSTEM/DEVBOOT.PBP - this is yet ANOTHER way of booting DevHook instantly into 2.71 firmware, but now you can do it after startup
- Press HOME + R TRIGGER to get battery percentage, voltage and temperature information.
http://dl.qj.net/vshextender-v0.1-fo...8921/catid/114
Screenshot Plugin
Allows you to take screenshots of the XMB
http://dl.qj.net/Screenshot-Module-f...8593/catid/151
Place this PRX into your memory stick root and change your config to load it on startup.
USB plugin by Slasher
Starts up the USB connection whenever you are in the XMB
http://www.sendspace.com/file/ml8o2h
Place this PRX into your memory stick root and change your config to load it on startup.
Thats all for now ill add more as they are created.


LinkBack URL
About LinkBacks
Reply With Quote



.
