After installing it... NO I keep them incase I ever need them, but yeah could you restate your error that way I have a better understanding of whats going on here
After installing it... NO I keep them incase I ever need them, but yeah could you restate your error that way I have a better understanding of whats going on here
okay, after installing 3.40oe-a . restarted it. format my stick. and place my iso game in iso folder. but then agen says an error "game could not be started (8001002)". do i need to go back to 1.50 just to have my deleted files back?
Alot of people are having that problem but sorry man can't help you with ISO's there not allowed here, or even showing you how to load them
oh okay. thanks btw
Please read the Piracy Policy in my signature. Thankyou.
Hi Guys, can you please help me? I already did some of the upgrades to 3.40 around 10 PSP's and thsi is the first time I encounter this problem, when I press the on button and the R button to go to the boot screen, I can see all the typical settings, but when I try to choose the configuration settings... all I can see is a blue background, can anyone advise on how to fix this? I tried going back to 1.5 when no problem at all, try to upgrade it to 3.40 but It has the same problem.
Go back to recovery, advanced, then activate USB flash1 and delete all the files.
No you won't brick.
Hi all, First thanks to all for the help at the start of this thread. I downgraded my psp to 1.50 then did the 303Hen then upgraded to the custom 303 OE-C... My memory card went corrupt and I recently got a new one, but when I try some homebrew games, it wont play or it doesnt even show up when I goto my memory card on my psp..
Would I have to downgrade to 1.5 again and repeat the whole process....Many thanks...
Where did you get the memory card from? Also, where are you placing the homebrew?
Got memory card same place as I got last one on Ebay,actually new one came from Uk on ebay. I'm placing files into main route of memory card where is says you know what. If I was to do the whole downgrading/upgrading again,would I have to go through whole process again?
Sounds like it's fake.
And no.
GUYS, anyone.... can somebody help me?Zitat:
Zitat von diasragu16
Yeah.Zitat:
Zitat von Adiuvo
Sorry, 234 pages late but just had to say this is a Fantastic guide. It really is the dogs ********. Very clear, simple, and barely any thinking needed.
I started off with 2.82 firmware on my psp, so used this along with the "2.81 - 3.03 to 1.5" guide, where in combination was 3794968038% more useful than any other guide (that I couldn't make head or tail of). Already recommended it.
Thanks alot.
I've updated my 3.10 OE to 3.40 OE and after the complete update, it tells me to press x to shut down my PSP and then restart it. But when i turn it on, only the green led turns on and nothing happens (the screen in off and no XMB nor recovery menu). I've tried to start in recovey mode, but nothing appears on the screen!! Is there any solution? it's bricked!! :(
P.S.: my memory stick is as original sandisk bought from a store and i've already updated several times (at least 4 times)
-= Double Post =-
I've also never had to use Recovery menu, so i don't now if it is necessary to install something or if it is already included in the 3.40 OE update! I've formated my memory card and placed the update folders on GAME 150, because in GAME folder they wont load! PLEASE HELP :(
Recovery is included when you install 3.40 OE. If you can't get to it, then there's not much you can do except buy a modchip and reflash.
Are you sure you can't get to recovery? I find that holding [R] from before you flick the power switch ensures you do get there if it's available.
If you can't get to recovery, unplug the PSP, remove the battery and leave it for about 20 minutes. After that, plug it in (But don't insert the battery) and try getting into recovery again. If you can't get it now, you've got a permanent brick and have obviously done something very wrong.
I didn't check the other 234 pages, it's kind of... ridiculous to do so.
My OEupdmaker doesn't seem to want to make the Dxar file.
I've tried clearing the memory stick for optimal success, and I've got a 4 gig.
It'll try to open the 150.PBP and then it won't open.
Any idea as to how to fix this problem?
Perhaps it has something to do with the program that is used to open the 150.PBP?
Remove .PBP from the filename.
That's such a noob mistake that I made.
Thanks so much Adiuvo, I've been spending weeks on figuring out what I did wrong.
Well it's up and running now, thanks.
Cheers
No problem, glad I could help :)
That tip is in the first post... People should at least read that before saying "Reading the other pages would take too long" - at least read the guide...
I've read and tried the steps until step 8.
However I used L+Triangle since mine is at 60% charged, I pressed x to continue with the installation and it prompts out this message:Zitat:
8. It will display some pink text, press X, and it will start flashing your psp. A percentage will be displayed.
and then it auto offs my psp around after a minute without seeing any persentage for the installation process. When I restart my psp, in my system information it shows that it is still version 3.10 OE-A.Zitat:
Opening and validating dxar file...
Did I do something wrong anywhere, and can anyone help me with this problem? Thanks in advance. Oh ya, the dxar file creation was correct in the validation, it is at 17.6MB. Thanks again. :)
EDIT: P.s. I've tried again when my battery is at 75%++ but I still get the same problem.
-= Double Post =-
Okies, I'm sorry for the trouble.
EDIT again:
I've managed to found out where I went wrong.
Actually part of the process was done by my brother so he skipped one part and it's actually because he forgot to move the dxar file to the 340oeflasher directory.
In short, it's just a simple mistake of omitment of steps.
Therefore, I'm apologizing on his behalf for the trouble caused (if any). :)
Ran thru update, started from 1.5
Everything went fine until after running the flash
Flash complete and stated to restart psp, restarted psp but get blank screen for 10-20 secs and psp shuts off
Sorry if posting same thing as others, but i looked thru over 50 pages and havnt found a resolution
Recovered from 3.02oe-a back to 1.5, tried again but still getting same thing, No UMD in drive, yes i downloaded 1.50 Update Eboot and 3.40 Update Eboot and renamed them to create DATA.DXAR
Is there a reason for this?
If you're going to 3.02 OE-A, why are you using a 3.40 EBOOT?
Also, why not go to 3.52 M33? It's the latest, greatest, whatever.
Sorry i meant 3.02 EBOOT
Well i looked around couldnt find anything but,only 3.02 a to b would allow ps1 games so thats why I am trying to flash to 3.02oe-a to b
What is causing it to go blank/shutoff after 3.02oe-a flash?
3.52 m33 has way better PS1 support...
ok thanks just wanted someone to give me some info
going back to 1.5 and to 3.55m33
=====
Ok its done thanks m33 team and everyone else.
curious tho does 3.55m33 have recovery files?
or can I just use the generic 1.5 recover
=====
NVM i got it here http://forums.qj.net/f-psp-homebrew-...m33-94683.html
=====
There is no need to revert back to 1.50 before updating. You can update to 3.52M33 from your current firmware.
o.k nvm
Well just want to know does 3.52m33 work like 3.02oe-B in playing ps1 games
or does the 3.52m33 only play ps1 games from buying at ps3/psn
Got a real quick question. When i load the recovery program for the firmware and select configuration, the screen turns blue for about 5 seconds then the PSP turns off. No menu options available. Did i mess up installing it?
- sorry didn't read a previous post on this. Please disregard. CHEERS!!!
It works just like 3.02oe-B in playing ps1 games..Zitat:
Zitat von golden05
hi im new on this forum and i tried to change my 3.02 OE-B into 3.40 OE-A with the help of the guide but once i Copy oeupdmaker and oeupdmaker% to /PSP/GAME and Copy 340oeflasher and 340oeflasher% in that same directory and put the 150.PBP and 340.PBP in oeupmaker and wanna start the update i get this
this game cant be started(8002014C)
i need some help please anyone...????
cause i want to install some themes from http://www.psp-hacks.nl/phpBB/viewtopic.php?t=470
but it says it needs version 3.30OE/3.40 OE
3.10 OE-A -> 3.40 OE-x XMB ThemezZ:
welll please reply....>.< i need somehelp T_T
Place it in PSP/GAME150.
Zitat:
Zitat von Adiuvo
i did that and now i do see the black screen and white letters but
it said opening and checking 150.pbp...
cannot open file...
what should i do? i followed the tuturial and this is what i get...
and im using version 3.02 OE-B at the moment...
please help...
Try renaming 150.pbp to just 150.
Do the same with 340.pbp if it throws the same problem with that.
thanks alot
hey emm about what i said last..
that it sayd cant open file... i checked today andit had a DXAR file inside?
even thought the whole thing didnt work? can i still use that file or what?
oh and i removed the .PBP and now it works so thx for ur help ^^
I have 1.5fw, when upgrading to 3.4oea, can I keep all my existing files on the memory card or do I need to have only the installation files?
Great, thanks.
YOu can keep the files..