It will work from any 1.5.Zitat:
Zitat von Final_Spirit
Printable View
It will work from any 1.5.Zitat:
Zitat von Final_Spirit
Awesome Thanks! *crosses fingers*
Good luck. :)Zitat:
Zitat von Final_Spirit
hehe no I am sure it is not TA-082 :) luckly.. But it seems like I did everything well.. all the files are on the correct place.. 220 files with an size of 13 mb in the root... I'm confused right now..Zitat:
Zitat von Bubby_the_Tour_G
ok i have a quick question i dont know what the problem is but i installed two games to my psp and they were bomberman arena and super mario war.Then i went to go install sega genisis emulator and i plugged in my usb on my laptop and this message came up "USB device not recognized one of the usb devices attached to this computer has malfunctioned,and windows does not recognize it" the strange part is i tried using my psp on two computers and the same message appears **please help**
Same happened to me...I just blew the dust out of the ends of the wire, worked perfectly then.
The best thing for everyone to do is reformat their memorysticks after downgrading.Zitat:
Zitat von royal55
#1. It's a good thing to do from time to time anyways.
#2. The format is slightly different on 1.5 compared to 2.0 and above. Programs like PSPBrew won't read the stick as being inserted in a 1.5 PSP.
I thought you didnt need any files from v1.50...Zitat:
Zitat von TheMarioKarters
WOW...i would have never thought of that Thanks alot Durka Durka mahn
I would like to recommend that it is probably good for you to reformat not only after but also BEFORE downgrading...just so the stick is clean and then you are almost guaranteed no bricks (from a MS error anyway)Zitat:
Zitat von NeilR
No..you need the 1.50 dump. Where else would the firmware files come from?Zitat:
Zitat von CoBrA2168
Yes, it worked.. Format your memory card BEFORE and AFTER
Man I wish I had my USB cable with me. :P
I don't even know anyone in my area that has a PSP, let alone a v1.5. Anyone know where we can get these files off the web?
Yo!
Anyone know if there is any updated info about the success rate?
I´m still a little worried (don´t want to brick my shine psp :P), anyone tried with a factory 2.5?
There some people telling me to upgrade to 2.6 and then downgrade to 1.5, should I try or wait a little longer to see how will go the development in the 2.5/6?
Thanks!
Let's see got me the needed game, got me the dump's, the eloader and ofcourse the downgrader should be all i need. Getting a little nervous but let's give it a try :)
ok i am here again about my usb.i tried blowing dust out of it and it worked and then when i took it out and put it back in the same message appears "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it" im not sure if i got much dust out or what.should i go out and buy some compressed air and spray some in the usb drive and my usb cables.i do everthing using my usb with my psp *PLEASE HELP**
Did you try what I asked you to do?Zitat:
Zitat von royal55
so now im on 1.5, thanks for the downgrader *g*
worked flawlessly here. *applause*
Yeah I used the beta v5 and it downgraded my thingie, also downloaded this for future purposes since its the final and all... nice, its nice to be at 1.5 again.
I got the necessary files, and followed the instructions, and I'm now running 1.5
Can't wait to see what all the hub-bub is about ;)
:Jump: :Punk:
yeah!!! it worked.
2.6 factory firmware now 1.5
Running homebrew & 2.0/2.5 emulator for my UMD games that require 2.X FW.
As happy as a pig in a big pile of poo!!!
Just downgraded my 2.01 PSP successfully ^_^
I wanna give a big thanx to Dark_AleX/Mathieulh/Yoshihiro for making this possible. Also i wanna thank everyone in this forum for their part in this and helping. Many thanx to all.
Me is a happy 1.5 user now.
What size was your memory stick and did you use the autoloader downgrader?Zitat:
Zitat von buggy.teh.cl0wn
Well i read that 32MB could work but i decided to use my 1GB just to make sure.
Can I use a German version of GTA: LCS to downgrade?
Please help me!!
yes u can. as long as it has the exploit
Sure you can. As long as you can run eLoader.Zitat:
Zitat von Danju
I used the dutch version so should give u no problem.
What model is your motherboard? Is it one of those TA-*** models? Have a look inside your UMD case.Zitat:
Zitat von cmberry20
Im interested if anyone downgraded the undowngradable haha - i have an original 1.50 PSP anyway so its not like i can try it :Jump:
My PSP is a TA-082. Should i just wait until a new version comes out that doesn't brick my psp? Or should i just go ahead and rent GTA and do the hack? What is the difference between the two?
WAIT WAIT WAIT WAIT WAIT WAITZitat:
Zitat von the_hustler11
hustler wait on it dont rush to use this, this will brick your psp it will not work on your ta 82. another forum member tried it and bricked his psp his experience has been stickied if you want to read it. so be patient and wait on it if not you'll end up with a 200 dollar paper weight.
it worked yeeeeessssss...sitting here enjoying my psp 1.5...thank you so much Dark_Alex your the bomb
I downgraded 2.60>1.50...but now I cant play my games, eh to bad...
use a 2.X FW emulator.
And that would be found , where ?
No, its not a TA-*** model. It does not have the code in the top r/h corner. There is another code on the PCB but its to the left & almost hidden. A picture can be found on page6 of the 'bricked TA-** PSP' threadZitat:
Zitat von mupet0000
@ no town, use devhook!
here my good man.... clickyZitat:
Zitat von No_Town
get the 0.41d version though