Zitat von gmatharu12
Using 2 PRX vshex.prx files in DevHook works!
You can make all three combinations work! This is awesome
Alright... (This is assuming you want the DevHook GUI + Return to 1.50 + Automount Off etc). Trying to re-call what stress I've gone through to get this working... lol...
(( !!!! Please backup your current configuration just incase !!!! ))
-> Install DevHook 0.45 As Normal (Firmware and everything setup etc)
-> Replace the Vshex.prx With this one (Return to 1.50 XMB)
-> Grab Riedje's Mod and ONLY copy the EBOOT.pbp and Devhook.prx to their correct folders
-> Rename the Vshex.prx to Vshex2.prx for example
-> Now copy the Vshex.prx from Riedje's mod, both should be there now.
-> Open "dh/271/flash0/kd/pspbtcnf.txt" in Wordpad (NOT NOTEPAD) (Thanks to logicbomb.de for this)
-> Make sure the line is added correctly so you have...
#vsh extender
ms0:/dh/kd/vshex.prx
ms0:/dh/kd/vshex2.prx
-> Save the file, Launch the EBOOT. Apply all your new settings.
-> Grab the DevHook GUI pack, install the EBOOT and DevHook.prx most importantly.
You won't be able to change the settings of the new mods, but once you have them set, you won't want to change them. I have also just got the original DevHook again with no on-screen menus which boots straight to the UMD by using a seperate INI file which you can do by hex editing the original EBOOT and searching for "devhook.ini"
Have Fun !
PS. Sorry if my explanations are bad... but hey... I just want to help.