MPH Firmware Launcher Guide

Zitat:

---

Zitat von post_break

Yes, I did exactly as he said up untill the part where the launcher failed.

error flash0://vsh/module/common_util.prx

followed by a bunch of the same type of errors, different prx files.

---

same here!

Zitat:

---

Zitat von post_break

Well I checked all of those errors out and the prx files seem to be where they should be. It just doesnt make sense.

---

same here! again...

The problem is that you need the mphfl.ini file
put it in the root of your memory card and then i think you will find it works :icon_smil

do i have to use MPH Firmware launcher 1.3.7u5u1 or can i use a higher verson of the Firm Loader, like 1.4.0

EDIT: GOT IT TO WORK!!!! with the Firm Loader Version 1.4.0 Thankz alot!

How do i get the web browser to read my bookmarks.html ( i used to have 2.60, so i have a bookmarks.html file with book marks)

How do i get it to read it?

i keep getting the message "An internal error has occurred(8008273A)". this happens everytime i try to save a connection. Can somone please help!

Thanks - MaDDaWg

Edit: when i do get it so save, i hit "L and R" to go to the 1.5 FW and i backed up the flash1 folder and emulated it again, and there was still the default one there, not my new connection :mad: . Also i replaced it with the backup i just took when it "saved" and it still wasnt there :dry:

When I start up the new version do I select install firmware?

Hi I'm new to the forums and the MPH Firmware Launcher. I tried to install firmware 2.00 by using this program and I used the manual process but I was unsure of what I was doing.Then strangley I installed the firmware 2.50. Now when I try to uninstall it, it says that there is an error and the install file can't be found. Does anyone how to fix this problem because I'm quite worried that it could affect my psp in the future because it is located in the ms0: and I can't just delete it from my pc.

Cheers in advance

oh - haha...

That happens if u used crappy usb writing for the duostick...

You got no other choice than backup all important data, and format the duostick in the system menu of the psp...

So, dont worry, its nothing serious...

Also... for emulating fw's i would suggest devhook... as it can FULLY emulate 2.5... not like mphfwl...

Yeah, you should just try DevHook. It's much better.

:confused: :confused: I have many ?'s... First of all, after you do this, can you still play iso games and homebrews ??? Also, after u do this, does your psp change version to 2.0 or does it stay at 1.5? Does this only add a web browser icon on my psp ? or do you have to do this everytime that you want to go on the internet.? will me doing this to my psp have any change of me not being able to play isos or homebrews? or messing up my psp??? Plz, i mean plz, email me at [email protected] with the answers. Thank you very much, and thx for all taht you and help have done...[/ :mrgreen: :icon_smil :mrgreen: :icon_smil :Punk: :icon_smil ;) :icon_bigg :D :confused: :icon_smil :mrgreen: :razz: :Punk: :razz: :icon_smil

Zitat:

---

Zitat von enterman

In case u dont no what it is, the MPH Firmware Launcher is a program that will allow all 1.0 and 1.5 users to use any firmware for there PSP without updating! And now with the newest version u can use the 2.0 web browser! This guide will help u with installing the MPH Firmware Launcher 1.3.7u5u1

First off, u will need to dl the 2.0 Eboot. U can dl it directly from PSPU here. Next, since I can not provide u with a decripted 2.0 update, u will have to decript it yourself which is accually very simple if u are using the correct program.

Now u will need to dl and install the fake updater program. DL it here. Just install it like any 1.5 program. Now, after installing it, take the 2.0 Eboot u dl and put it in the UPDATE folder that is in the fakeupdate folder without the % sign. Now, disconnect your PSP from the USB and, before starting up the fakeupdate program, u will have to Restore the Default settings on your PSP. U must do this, there is no way around it. After doing that start up the fake update program. When it starts it will ask u this: "Do you want to fake-update to firmware 2.00." Choose yes. Then it will go to a screen that says loading PSAR data. After serveral sec. a message will come up that says: "Update data is loaded in RAM. Do you want to delete the update file to free space?" Choose yes. Immediatly after choosing yes another message will come up saying: "Do you want the update files to be decrypted?" Choose yes. After choosing yes it will start decrypting the 2.0 Eboot. this will take somewhere around 2 min. After it is done a message will come up saying this:

"Done.

Extraction/decryption was done by: PSARDUMPER by PspPet version .02A

great job guy!!!!"

When the above message comes up just push circle. After it goes away another message will come up saying: "Do you want to copy your flash1 to ms0:/F1?" Choose yes. Copying the flash1 only takes a few sec. After it finishes a message will come up saying: "flash1 copy finished." Just push circle to make this message away. Then push circle again at the "Press any key to exit" message. Now go back to USB mode on your PSP and go to the root of your PSP. Here u will see to new folders called F0 and F1. Rename these to flash0 and flash1.

Now u will need to dl the MPH Firmware Launcher version 1.3.7u5u1 U can dl it from PSPU here. Now just copy the MPHFL and the MPHFL% to your games folder. Copy the mphfl.inf to the root of your memory stick. Now disconnect your PSP from USB mode and go to your memory stick and start the MPH Firmware Launcher. Now, once it loads up, just push X to start emulation of 2.0 Now once it boots up to 2.0 u can go to the web browser and use it! Just manuver over to the web browser icon and push X. Now, after the web browser has booted up count to 2 because, if u try to do things to quickly it will freeze up on u. Manuver up to the web entry bar at the top. Count to 2 once again before pushing X. After u push X it will take u to a typing menu where u can enter the website u would like to go to. Some sites do not work correctly. I typed in http://google.com For whatever u type in, after u type it go up and push X on the enter button. now it should take u to a message thats going to ask u to create a new connection. Before doing this make sure u have had your wifi swich down the entire time u have been in the web browser. If u havnt then just push Left trigger+Right trigger+Start and try again. If u have kept it down however then we may continue. Create a new connection like normal naming it whatever u want (I just left it as connection 1) and when u get to the scan part of it DO NOT flip on your wifi swich yet. Instead click scan once it says that your wifi swich is down, before exiting this message flip your wifi switch to the on possition then exit the message. Now push scan again and choose your wifi connection. After choosing your wifi connection flip your wifi switch to the off position then count to 2. Now just create the rest of the connection like normal and push X once u get to the end. After creating the connection choose it and it will connect to the wifi and load up the web page (hopefully). Well there u have it 2.0 with AVC support and Web Browser on a 1.5 PSP. Enjoy.

For those of u that are getting the error when creating the connection in the web browser do this. When u start emulation of 2.0 go to network settings and create the connection from there. Then exit 2.0 and back up your flash1 folder. Then restart emulation and go to the web browser, type in your web site, and start the connection like I said above.

---

i have a small problem with mine. When i get to the step that i click on the firmware luncher thing and then click x to start mine says something about an error with the flash0 folder.... what can i do? is it possible to download the flash0 folder and replace it with the one i have? Can anyone help me?


the erors have to do with these things:::

msaudio.prx
ushbridge.prx
chkreg.prx
heaparea1.prx
paf.prx
and
common-gui.prx

these are the things that say error ...
can anyone help me fix this or tell me were i can download the flash0 folder so that i can replace it with the one that i have.? please email me at [email protected]

Just use DevHook. MPH is buggy, and very inferior to DevHook.

Zitat:

---

Zitat von pspfan

Just use DevHook. MPH is buggy, and very inferior to DevHook.

---

for now,,,

What do you mean for now? Is MPH making it less buggy? He hasn't had news in a while.

MPH is always working on something,,
they havent said anything, but im sure they will release something that can stand up to devhook,,

we will just have to wait and see