2.01/2.5 and now 2.6 eLoader setup guide!

[Hemperor]

Ok since this was requested I decided to do it. Here is how to get the eBOOT launcher installed on your PSP.

What you need.
1) A 2.0/2.01/2.5/2.6 PSP
2) A copy of GTA LCS
3) A memory card
4) A USB cable
5) WinRar to extract files http://rarlab.com

Guide One by Serideth
Guide Two by Timbo400

Guide One

Download the Loader from here: http://dl.qj.net/eloader-beta-for-2..../885/catid/114

Unzip the files to your desktop using Winrar, you can get this at: www.rarlab.com/download.htm
Example of unzipping.


Once the files are unzipped connect your PSP to your computer and open its folder up.

Paste the folder called PSP that you extracted over the old one (this will overwrite save games so you might want to remove them by going into X:\PSP\SAVEDATA and copying in the files onto your desktop)
Like in this pic...


Once this is done you will have the eBOOT launcher installed, but now we will show you how to get the snes emulator working on it.

Go to: http://files.pspupdates.qj.net/cgi-b...0,0,0,0,4,1093 and download the SNES Emulator. If that link doesn't work use my server http://animeomnislash.net/uo_Snes9x_002y32.rar

Once downloaded extract the files to your desktop.

Connect the PSP to your computer and open its folder, then go to X:\PSP\GAME

Once in the game folder, paste in the SNES folder. ROMS can go into the GAMES folder also.

And now you have done the Hard Part.

Now to run the Emulator using the eLoader.

Start up your PSP and play GTA, once you are in game, load the file called eLauncher. This will load it up for you.

Once it has loaded (It might take up to 30 seconds to load) you will see the SNES emulator, select this.

And you are done. Congrats you have taken the first steps of running 2.01/2.5 homebrew, and enjoy.




FAQ

My emulator doesn't load!
Sometimes it doesnt and your PSP will shut down, don't panic this happens to most of us, just keep trying it will Load

My SNES Lags
Yes this can happen, if it does just turn the PSP to 333mhz in the snes option screen, you can get to this by moving the Joystick to the left.

The eLoader wont load!
Did you unload the Cheat Device first(If you use it) reports show that the eLauncher works better if this is unloaded, to unload hold L+R and press up


WARNING WARNING, SNES EMULATOR RANDOMLY WORKING AND I'M GETTING MAD.
Yeah, this is happening to all of us, the chances are it will be fixed so we just got to live with it for the moment.

Will running my PSP on 333mhz dammage it?
No, it will only make your battery go down quicker.

Nothing here will work! What else?
Format the memory stick and put it on again, this has been proven to work by Timbo.


Ill add more if I think of them, hope this is helpfull and sticky it if you want to since it is usefull.



Find my guide too retarded to follow? Well follow...

Guide Two

here is mine, its a tiny bit more detailed, but it's for the noobs

Timbo400's Guide to getting "Homebrew 2.01+ GTA EBoot Loader working"

Ok here is what you need:
- A PSP with firmware 2.00+ (This guide is mainly for 2.01+ users as 2.00 already has a eboot loader)
- A Memory Stick with at least one normal GTA gamesave on it (Well if you don't have one, your fu*ked altogether rofl)
- USB cable to connect your PSP to your PC (To transfer files DUH!)
- GTA Liberty City: Stories - This game is also required to launch the eboot loader as there is a gamesave "loophole"
- The 2.0 eLoader for v2.00, v2.01 and v2.50 PSP's created by Fanjita (Thanks alot!) - Here is the link Eboot loader for 2.01+ PSPs
- And some homebrew for it, in this guide I will be using the "Uo_Snes9x" - Link is here - Snes9x Emulator
- Also you may need "roms" (the stuff that the emulator uses to play games), I cannot post any of that here, but you can look it up or so

Starting:

1.First connect your PSP to your PC (If your stick hasn't been in sony psp format, which is where there are the psp folders, exam psp/game or psp/savedata, it is recommended you make them to make this guide a little easier for those noobs out there)

2. After you have downloaded all the files needed for you PSP you must determine what version your GTA is UK, US or the other one I don't know, really this doesn't matter i think, just unzip the files from the rar file that you downloaded (the eboot file) and then copy all the files into your psp
(The files/folders are "psp", lmao just copy that and paste it into your psp directory, so it looks like this "x*:/psp" * is the drive that the psp is called, on my PC it is "H")

3. After this what has happened is that since you unzipped/unrarred the files from the eboot file you downloaded, the files are "fresh" and so what happened was that these "fresh" files will be the first to load when GTA loads, you do not want this to happen! So what I did was copy one of my normal GTA save folders onto my desktop then zipped/rarred it and then unzip/unrar it to make them "fresher" than those eboot files (this may sound slow but it gets the job done, and trust me it only takes 5 seconds ) then after the normal GTA files are unzipped just paste them back where they should be! (Your game will not be affected in anyway! it's just the files dates are renewed)

4. Unzip/unrar those snes files! then what you need to do is go to your psp's game directory on your PC (x:/psp/game/) and create the folder "SNESEMU" so the directory looks like this
"PSP\Games\SNESEMU" (Can it be "PSP\Games\snes9x"?)

Then also make a folder called "roms" in it so the directory now goes deeper and looks like this

"PSP\Games\SNESEMU\ro ms"

Then paste that rom that you own into the directory so it looks like this

"PSP\Games\SNESEMU\roms\r o m.smc" (Can you paste zip files?)

5. Now you can remove your PSP from your PC, insert the GTA LC:S UMD into your PSP and run it, hopefully if you have done it correctly your normal GTA saved game will load, if it hasn't re-read and re-follow from step 3.
Now press start and press right till you highlight "game" then press "X" and open "Load Game", scroll down till you find "Fanjita's E-boot Loader" GTA save. Press "X" and the e-boot should load (If it doesn't redo this guide again till it does work), then a background with a white psp should show up and on the left in text "Snes9x emulator" (Something like that) should show up. Press "X" and your emulator should work.
If your PSP freezes and turns off from here you have the same problem I have, if it works you are a lucky *******.

Thank you for taking your time to read this

Timbo400




Supernets 2.5/6 Guide

Supernet2's Guide To Getting the "eLoaderBeta_260" to work on the PSP v2.50 - v2.60

By: Supernet2

* = This is the assigned drive to your PSP

Steps;

1) First unzip "uo_Snes9x_002y32" to the directory "*:\PSP\GAME".

2) Then Unzip "eLoaderBeta_260" to the directory "*:\PSP" and say yes to overwrite all things if the question is asked. (No this will not delete any of your Information)





Part 2, Running the "eLoaderBeta_260" on the PSP;

1) Start up your PSP, take out memory stick, and then make a new game.

2) Save on Save slot 3 or 4.

3) Now loading from the GTA LCS, Load the File that has the name "Fanjita" in it (Make sure you wait 20-30 seconds before clicking yes to continue on loading the EBoot loader.

4) you will see a screen. Click only on "uo_Snes9x_002y32" after waiting 20-30 seconds longer.

5) You will see a load screen with the SNES emulator loading (Your screen will go blank for a few seconds so dont press any buttons)

6) Click on a Rom that is saved (read the Instructions that are on the screen)

7) You are now ready to play a SNES game on the PSP

Part 3, Installing Rom's on the PSP;


1) Look on google for "SNES rom Downloads" and click on a site.

2) Download the Rom you want for your SNES (Super Nintendo Entertainment System)

3) UnZip the Rom to the directory "*:\PSP\GAME\uo_Snes9x_00 2y32"

4) Load the Rom using the Directions from Part 2






Problems/Questions;

Q - Questions
A - Answer's
1a,2b,3c - Problem's for that current question.

Q) Why is it my "eLoaderBeta_260" wont load on my PSP?

A) There is 3 possible problems.

1a) You might have loaded the "eLoaderBeta_260" to fast. Wait until the PSP self power's off, (It will self power off as a way to prevent "eLoaderBeta_260" from hacking through security flaw) Turn the PSP back on and load your GTA: LCS game, then Load the "eLoaderBeta_260" and when it show's the "Load Complete Screen" Wait 20-30 seconds. After that Click yes to load "eLoaderBeta_260" and then the screen should go blank for 5-15 seconds. Then When it go's to the Blue screen, DO NOT PRESS ANY PSP BUTTONS FOR 20-30 seconds (If you do, the PSP will not load the Emulator properly and it will freeze apon loading the emulator, causeing the PSP to shut down after 10 seconds.) Your Problem Should be fixed if done correctly. (Takes a few try's, took me 15 try's to fully figure out this problem.)

2a) You probably didnt load the "eLoaderBeta_260" loader with the GTA: LCS Game load during in game. Try Loading your GTA: LCS game first and then load the "eLoaderBeta_260".

3a) You Cant put the PSP on stand-by (Put it in power save mode due to this will cause the PSP to freeze up and crash [As in Emulator Freeze's up and you must take out battery from the PSP to shut the PSP off]). Try changing the System settings in the PSP by changing your "Power save settings" to off, this will fix the problem if done properly.


Program's that i tested that Worked with my Method's 1a, 2a, 3a;

1) eLoaderBeta_260 (Thanks Fanjita for Making this it kicks ASS!)
2) uo_Snes9x_002y32


*NOTE* Oh and the PSP Memory Stick dose not need to be Reformatted for "eLoaderBeta_260" to work.


Hopefully, this Guide helped you people (I used 5 hours figureing this stuff out cause i just wanted to get use to playing SNES on the PSP)
Oh and You can Download My Copy of the Directions. Just Make sure you give me credit if you edit it since i did make this one by myself.

[Vee]

thanx i love u mate thanx so much i am going 2 try it using your guide thnx!

[Hemperor]

No problem, and don't be afraid to ask anything and I'll add it in

[timbo400]

here is mine, its a tiny bit more detailed, but it's for the noobs

Timbo400's Guide to getting "Homebrew 2.01+ GTA EBoot Loader working"

Ok here is what you need:
- A PSP with firmware 2.00+ (This guide is mainly for 2.01+ users as 2.00 already has a eboot loader)
- A Memory Stick with at least one normal GTA gamesave on it (Well if you don't have one, your fu*ked altogether rofl)
- USB cable to connect your PSP to your PC (To transfer files DUH!)
- GTA Liberty City: Stories - This game is also required to launch the eboot loader as there is a gamesave "loophole"
- The 2.0 eLoader for v2.00, v2.01 and v2.50 PSP's created by Fanjita (Thanks alot!) - Here is the link Eboot loader for 2.01+ PSPs
- And some homebrew for it, in this guide I will be using the "Uo_Snes9x" - Link is here - Snes9x Emulator
- Also you may need "roms" (the stuff that the emulator uses to play games), I cannot post any of that here, but you can look it up or so

Starting:

1.First connect your PSP to your PC (If your stick hasn't been in sony psp format, which is where there are the psp folders, exam psp/game or psp/savedata, it is recommended you make them to make this guide a little easier for those noobs out there)

2. After you have downloaded all the files needed for you PSP you must determine what version your GTA is UK, US or the other one I don't know, really this doesn't matter i think, just unzip the files from the rar file that you downloaded (the eboot file) and then copy all the files into your psp
(The files/folders are "psp", lmao just copy that and paste it into your psp directory, so it looks like this "x*:/psp" * is the drive that the psp is called, on my PC it is "H")

3. After this what has happened is that since you unzipped/unrarred the files from the eboot file you downloaded, the files are "fresh" and so what happened was that these "fresh" files will be the first to load when GTA loads, you do not want this to happen! So what I did was copy one of my normal GTA save folders onto my desktop then zipped/rarred it and then unzip/unrar it to make them "fresher" than those eboot files (this may sound slow but it gets the job done, and trust me it only takes 5 seconds ) then after the normal GTA files are unzipped just paste them back where they should be! (Your game will not be affected in anyway! it's just the files dates are renewed)

4. Unzip/unrar those snes files! then what you need to do is go to your psp's game directory on your PC (x:/psp/game/) and create the folder "SNESEMU" so the directory looks like this
"PSP\Games\SNESEMU" (Can it be "PSP\Games\snes9x"?)

Then also make a folder called "roms" in it so the directory now goes deeper and looks like this

"PSP\Games\SNESEMU\ro ms"

Then paste that rom that you own into the directory so it looks like this

"PSP\Games\SNESEMU\roms\r om.smc" (Can you paste zip files?)

5. Now you can remove your PSP from your PC, insert the GTA LC:S UMD into your PSP and run it, hopefully if you have done it correctly your normal GTA saved game will load, if it hasn't re-read and re-follow from step 3.
Now press start and press right till you highlight "game" then press "X" and open "Load Game", scroll down till you find "Fanjita's E-boot Loader" GTA save. Press "X" and the e-boot should load (If it doesn't redo this guide again till it does work), then a background with a white psp should show up and on the left in text "Snes9x emulator" (Something like that) should show up. Press "X" and your emulator should work.
If your PSP freezes and turns off from here you have the same problem I have, if it works you are a lucky *******.

Thank you for taking your time to read this

Timbo400

[Hemperor]

You poisned my thread >_> lol, jk I wanted to keep mine short with lots of spaces so it was easy to read, but meh, I hope this gets stickied with our guids, It will stop alot of questions.

[timbo400]

Hey you want me to remove it? ?I can do it if you want

anyway back on topic, my one still no worky, rofl

[Hemperor]

Nah timbo, yours covers the differnt regions, so keep it in, besides two guids are better than one.

[biggup1234]

This is an excellent guide and should deffinately get stickied

[Hemperor]

Actualy, I just pasted yours into my first post underneath mine so more people will see it, hope you don't mind.

Thanks biggup

[Vee]

IT WORKED YES IT WORKED

sERIDETH U MADE A 12 YEAR OLD VERY VERY HAPPY THANK U

Guess wat rom i runed it had 2 be ZELDa!

[Hemperor]

Originally Posted by Psp King

IT WORKED YES IT WORKED

sERIDETH U MADE A 12 YEAR OLD VERY VERY HAPPY THANK U

Guess wat rom i runed it had 2 be ZELDa!

Ohh, great idia, I'm going to play that, I'm glad it worked. And thanks for the feedback.

[Vee]

Oi yea sticky this and Timbo your one is swag i read it and i couldnt use it even do its 4 noobs but serideth's 1 is the best!

[Hemperor]

Originally Posted by Psp King

Oi yea sticky this and Timbo your one is swag i read it and i couldnt use it even do its 4 noobs but serideth's 1 is the best!

They both take differnt aproaches I guess, some people will think mine is a pile of poo lol. well main thing is you got homebrew working

[Hemperor]

Just to tell you Timbo updated his guide and I added a new FAQ to mine

[timbo400]

i just made it work,

add to FAQ

format memory stick if all doesn't work, because thats what i did

thanks serideth

[Hemperor]

Ok, cool, thanks

[NeilR]

Nice Tutorial/FAQ guys. Stickied.

[Hemperor]

Originally Posted by NeilR

Nice Tutorial/FAQ guys. Stickied.

Oh sexular, thanks, hope people actualy read this now...lol

By the way if anyone has anything at all the want added to the FAQ on this subject toss it at me

[Vhero]

yeah the emu only working 1 out of 5 times is annoying but I know Fanjita will fix this in future releases. At least we got something I got the emu working with Fanjitas guide but this one is great and 70% anti-n00b you will still get 30% asking as always. This clears up around 70% of them though.

[Nemesis-Carl]

at wich speed we need to run the snes emu?

[JCam]

Ok so everyone has the problem of it crashing and there is nothing you can do about it? Do I have that right?

[Hemperor]

Originally Posted by Nemesis-Carl

at wich speed we need to run the snes emu?

I suggest 333ghz

Originally Posted by Cam

Ok so everyone has the problem of it crashing and there is nothing you can do about it? Do I have that right?

Correct, and Fanjita will fix it.

[skeletor132]

ok i had the same problem with the loader crashing untill i tunred all the power save setting off then the thing loaded like a charm, maybe that will help with some of the problems u guys have had

[hell0ween]

jajaja well i guess im a lucky ******* but.... my question now is how the hell i get gta started normaly

[Tigersaid]

When I go to Game in the menue and choose the "uo_Smes9x for PSP" it says:


"This game cannot be started.
This data is corrupted."



Hrmm..

Could any one tell me what this mean..


"A Memory Stick with at least one normal GTA gamesave on it (Well if you don't have one, your fu*ked altogether rofl)"


Where do I get one normal GTA gamesave...?


I did exactly as the guide told me but I got stuck in my mind on that sentence..

help any one?

[Hemperor]

Originally Posted by skeletor132

ok i had the same problem with the loader crashing untill i tunred all the power save setting off then the thing loaded like a charm, maybe that will help with some of the problems u guys have had

Well, maybe, I'll test it myself, thanks.

Originally Posted by hell0ween

jajaja well i guess im a lucky ******* but.... my question now is how the hell i get gta started normaly.

Put the UMD in the PSP, turn it on, then when it loads load up the eboot as if it where a save file.

Originally Posted by Tigersaid

When I go to Game in the menue and choose the "uo_Smes9x for PSP" it says:


"This game cannot be started.
This data is corrupted."



Hrmm..

Could any one tell me what this mean..


"A Memory Stick with at least one normal GTA gamesave on it (Well if you don't have one, your fu*ked altogether rofl)"


Where do I get one normal GTA gamesave...?


I did exactly as the guide told me but I got stuck in my mind on that sentence..

help any one?

Ok, you load the eboot launcher from in the GTA game, start up GTA and go to load game, then select the eboot loader and load it as if it where a save game file, then when that loads you will see your snes, click on it and you are in

[varac]

It's does'nt work

[varac]

When I load snes emulator, my psp shut off 9 time on 10

[Tigersaid]

Originally Posted by Serideth

Ok, you load the eboot launcher from in the GTA game, start up GTA and go to load game, then select the eboot loader and load it as if it where a save game file, then when that loads you will see your snes, click on it and you are in

Hrmm!!
I know Im not a noob!! but! look here then.. lets take it easy, baby steps hehe..

1. I start my PSP.
2. I go to "Game" to the next far left.
3. I see in "Saved Data Utility" 3 eLoader GTA beta images.
4. I see in "Memory Stick" uo_Snes9x for PSP 0.02y32

What next? what should be my move

[timbo400]

Originally Posted by Tigersaid

Hrmm!!
I know Im not a noob!! but! look here then.. lets take it easy, baby steps hehe..

1. I start my PSP.
2. I go to "Game" to the next far left.
3. I see in "Saved Data Utility" 3 eLoader GTA beta images.
4. I see in "Memory Stick" uo_Snes9x for PSP 0.02y32

What next? what should be my move

ok start the GTA umd, wait till a new game loads (a normal game where your tony) then press start and find "game" (its the third one) press X to go into it, then "load game" from here you choose "eboot launcher" then a white psp should come up on your psp screen, select the snes emulator then presto your done!

Also it MAY not work the first time! don't hesistate and come back here! try again, it should work at least once within 5 goes; my emulator never works the first time but so far it kicks in on the 2nd or 3rd try!