You can't use Devhook on 2.82 or 3.02. Why would you need to anyway, lol?Zitat:
Zitat von enathans
I followed the guide, but when I try to launch DevHook, it turns off my PSP.
Printable View
You can't use Devhook on 2.82 or 3.02. Why would you need to anyway, lol?Zitat:
Zitat von enathans
I followed the guide, but when I try to launch DevHook, it turns off my PSP.
I was trying to install devhook .51 using the all in one boot method, i was already at the end of the guidelines - installing the dh fw installer 301 but then a mssg appeared on my psp saying that it cant create report file - myb memory stick might be full or it cant create OUT folder, i cant understand since i still have 2gig left out of 4gig. pls help me, thanks
wowo, nice guide! thanks a lot
hey pepzzz thanks for da guide, its aceee :D:D
jus wanna no can u go online with it e.g play mgs online, surf the net.......cheeers
how do i get this to auto load with harleyg's CF v.2..?
is there a path that i am not setting correctly..? when i start with the wifi switch down, it says "unable to load devhook" but when started from 1.5 game channel (in the xmb) this newest devhook works like a charm...
thanks, in advance, for any information and input on this matter.
-= Double Post =-
answered my own question:
check this thread and download the file linked to in the first post. it will be a rar'd devboot.pbp file - extract to your x:\psp\system dir (where "x" is the letter of your psp memory stick when viewed through file explorer).
I installed devhook 0.51.000 with fw3.02 succesfully!
But I also want devhook to emulate 2.71, I used the autoinstaller but when I start it with the fw2.71 eboot in the root of memstick, it says it has a 50/50 chance of working. I did run it but fw2.71 is not selectable in devhook.
What have I done wrong and can fw3.02 and 2.71 both be installed at the same time?
I had the same problem but I believe that I may have found a solution.Zitat:
Zitat von kRuCiAl
Try downloading the update that is specific to your PSP's region rather than using the US version (unless the PSP you have is the American version). In my case, I used the Australian 3.02 update and everything now seems fine. Also, you may need to play around with the preload address as well.
some one help plz! I put all the files where they are supposed to be but when I try to run on it on SE - C I chose Kernel 1.50 I just appears the psp logo then it turns off! :s
Hardrive you should mention that you need to flash the config to flash1 between steps 9-11 on method 1 otherwise you gonna get bsod in dh and going back to xmb when psp is restarted resulting in another bsod. Me and others would be grateful because we don't all go through the posts on this thread or to some other thread to make this work. The rest of the steps you have are correct, and you do mention about this in method 2, but vaguely, so I'll give you that. :)
I thought with the new version of DH that you do not need to flash it anymore.Zitat:
Zitat von Gillberg
Nope, still had to flash it.
ok i did everything right well not so lol
my emulated 3.2 doesnt load UMD games at all it freezes at the white start up screen
the Devhook .51 download appears to be corrupted. I've downloaded it 3 times or so and everytime it stops around 92% and I get the corrupted file warning when I try to unzip it. Anyone else having this problem?
dude, thx so much, it was so useful....
Okay, after numerous headaches I managed to get Devhook running. (Protip:be sure you're using the 1.50 kernal when you run it) It loads fine, I get to the menu screen and I can input my settings fine. However, when I try to launch it, it gets to the part where it says it's rebooting the psp, and then it shuts off and doesn't reboot. I turn it back on and I'm back at the psp start menu as if nothing happened.
I'm using SE-C, and I'm pretty sure I followed all the instructions correctly.
thanks mayn i found your guide very helpful:tup:
can i delete all the other files on the memory stick now?..or which ones do i leave on there?
I went back to 1.5fw then I used the all in one eboot installer for devhook .51 then upgraded to 2.71 SE-C. Devhook now works FLAWLESSLY in my psp, no more freezing, no more shutdowns when entering/exiting games/homebrew. Its now pretty stable, try it.
i got it too work after 30 hours of trying since last friday :)
bad part is that it crashes when exiting ftb2 online alot
I got it to work on my fourth try, But i was trying when he didnt update this thread so i didnt know if i was suppose to flash, But once i flashed the f1 everything works great
I have installed .5101 for my psp and my friend's before using the DIY method.
Backside itchy formatted my MS.
Followed this method step by step and and always got black screen.
Somehow got the blue screen of death and bricked my PSP last night!!
Luckily I had custom firmware and did recovery to 1.50
This is how I got it to work after trying out different ways.
Copy over .51
Copy over .5101
Copy over EBOOT.PBP
Copy 302FW installer
Run 302FW installer
Launch DH which resulted in hang
Launch DH
Flash install config
Hello 3.02
hey everyone,
whenever i boot devhook the screen turns black and says this......
Save launcher setting
Loading devhook
Dh Ver. :0. 51. 0000
Reboot System
Then the screen goes completely black then turns off after about 10 seconds.
Ive tried over 20 different ways of installing devhook and every time i still get the same error.
This is driving me INSANE!
Can anyone please if anyone can help me!!!
try formating ur memory stick * be sure to back up ur files*
and then try to install AGAING lol
is there anything an end-user can do to make this beta release more stable? no matter what happens i still can't exit successfully on some of the games i have. i've heard it's possible to use the sysmem.prx from 3.00 and replace it with the 3.01/3.02 which makes it more stable.........at least that's what i've heard in another forum.
I can not get the button swap to work, i have put them in the right folders and when i go to 3.01 it still is the O for X
use the new "universal" auto-installer 2.80-3.02 version. you won't have to worry about the button swap issue. i did it just now and works fine.Zitat:
Zitat von laxman
as far as gaming goes though i was wondering what settings people have been setting within devhook so that game-exit lock-ups happen less-frequently......
I have 3.01 emulated from devhook 0.51 runing on my 2.1SE-C PSP. Everything seems to be working fine , the button swap method works and "Thrillville" is now playable on my psp. Yay! The new "visualizer" is ok , but meh .. they really need to add a bunch more for it to be a great addition .. but it is a nice lil feature that hopefully will be added to in the future. (I'm actually surprised a homebrew hasnt been created by now to do something like this in non 3.x FW)
My main question is this .. now that I have everything installed and working can I delete the main "eboot" file in the root of my memory stick? And will this affect devhook and the new formware?
great work, i just got it work after many retrys. tks again!:Jump:
If you're talking about the UPDATE eboot and/or PSAR then go ahead and delete them.Zitat:
Zitat von Buckethead
Zitat:
Zitat von Bam-0
i did that the first time it ****ed up.
anything else you can think of?
You know what, Hardrive ain't listening anymore. There have been many versions of the DH and DH installer, might as well put a little mini guide here for you guys for the latest versions (using 2.71 SE b'' with 1.5 kernel for GAME folder):
Step 1: Latest Devhook here
Step 2: Latest DH installer
here
Step 3: 3.02 US FW here
(click download now link, or email me [email protected] for it if you can't find it. QJ doesn't have it on their site.
Step 4: unrar DH, copy contents of MS_ROOT of DH to root of mem stick(double click E: drive or whatever)
Step 5: unrar DH installer, copy DH installer to PSP/GAME/
Step 6: copy 3.02 EBOOT to root of mem stick
Step 7: run DH installer, press x, wait for restart.
Step 8: run DH(o to confirm, ^ to go back), flash config to flash1 under flash install, put xmb menu under boot mode(optional), firmware put 3.02. Start Devhook.
Step 9: say hello to 3.02, delete 3.02 eboot and DH installer.
probably a silly question but does the installer automatically remove lflash_fatfmt.prx. If it doesn't, you will have to delete it manually as I understand it can cause registry issues (as per the readme from latest devhook).
can i do NO-UMD in Devhook .51? Im am in SE-C and have 3.01 emulated.:tup:
firmware works great on my psp
just wont run any games, wether it be UMD or iso it wont work at all it freezez in the game intro * u know the white screen with the grey PSP letters*
So can anyone help me with my....
"Save launcher setting
Loading devhook
Dh Ver. :0. 51. 0000
Reboot System"
Error?
I have the same problem. I have all the feature's of 3.2, the high firmware downloadable demos work, the interweb works (w00t) so I just B.O.U.G.H.T Metal Gear Solid Portable Ops, but it freezes at the white psp start screen thing where it says psp.Zitat:
Zitat von Bam-0
edit!!!!!! I got it to work with some tinkering, for some reason it thought i had 3.01 but i followed the steps for 3.02 so what i did was i went into the dev hook folder and just switched the names and now it works the games work! HOORAH METARU GIIA
Hi
this is my first post but im not a noob. but im haveing truble with my psp i got 2.71 SE-C and i did have devhook 51.1 with FW 3.02 but i deleted it and now trying to run 3.02 Devhook Firmware Installer but my psp keeps booting off. even if i do Method 2: The normal way then i go to devhook & it keeps booting off & every time i downgrade back to 1.50 and try devhook again & its doing the samething then i go back to 2.71 SE-C and it still booting off.
can anyone help me plz
This was very useful, thanks alot!
Everything works perfectly :)
Okay soo.. I`ve installed this using Method 1 on my 2.71 SE-C, and it works perfect. Now, I`ve also installed this again with Method 1 on my bros 2.71, using HEND and DH .4X 2.71 to emulate 1.5. Everything is installed fine and dandy, but when I run DH .51 and hit Start, it brings me back to 1.50 xmb. Help?
You can't run it from an emulated 1.50.Zitat:
Zitat von NickTheBlitz
There is a port of Devhook .51 made for HEN D users so you don't have to emulate 1.50.
Try this guide. http://forums.qj.net/psp-homebrew-hacks-help/82389-guide-installing-devhook-51-2-71-hen-d.html
Tried it, I followed the guide exactly and theres no menu on the dh .51!! Its just a black screen with everything else.