Tekken 6 Patch for 5.00/5.03/5.50

[nickxab]

I've tested this patch and it is working on:
- 5.50 GEN-D2 (Fat PSP and Slim PSP)
- 5.03 MHU (Slim PSP using 5.03 HEN).
- 5.00 M33-6 (Both Fat and Slim PSP)
Patch should work on all custom firmwares that are 5.00 M33-6 and higher.
You may need to set the CPU speed to default to get the game to start.
If the patched game isn't working and you are on 5.50 GEN-B2, try updating to 5.50 GEN-D2.

There is a Patch to convert the UMD version to PSN version further down this post if you want to change the version.
If you are not sure which version you have then scroll down to the "Tekken 6 Version Check" section at the bottom of this post.

Do not rebuild the ISO with UMDGEN!
UMDGEN will cut out the 'hidden' data file making the ISO not work.

Recommended Custom Firmware Settings:
(press 'select' in the XMB to change the settings)
UMD Mode: Sony NP9660
CPU Clock XMB: Default
CPU Clock Game: Default

-------------------------------------------------------------------------

Tekken 6 - Patch for 5.00 M33-6 and higher

Windows Patcher: (Works on both UMD and PSN versions of the ISO)
Patcher for Windows that puts the patched eboot.bin into the PSN version of the ISO.
This is the new version of the patch that works on 5.00 M33-6 and 5.03 MHU.
You can safely apply the patch over an older already patched ISO.
you can even put the patch files on your PSP and patch the ISO directly.

Tekken 6 WorkingPatch

Windows Patcher - Applying Instructions:
1) Make a backup copy of your ISO before applying this patch just in case something goes wrong.
2) Extract the Patch and place the 3 files into same folder as your 'Tekken 6' ISO.

3) Go to the properties of your ISO and untick the read-only box if it is ticked, then click apply > ok.

4) Rename your ISO to "Tekken6" if you have 'file extensions' turned off (this is the default on windows)
(If you have turned 'hide file extensions for known filetypes' off you need to rename your ISO to "Tekken6.iso".)

5) Double click the patch file, press any key and it will apply the fixed eboot.bin.
6) You should see a lot of dots on the screen when it is patching.
(If you don't see the dots either your ISO is read-only or is not named right.)

7) Press any key to close the patcher when its done.
8) Copy the patched "Tekken6.iso" file to your memory stick.

-------------------------------------------------------------------------

PPF Patch: (Has patches for both UMD and PSN versions)
Patch in PPF Format, You will need a 'PPF Applier' program to apply the patches.
(for Windows use 'PPF-o-Matic', for Mac use "PPFMaster" and for Linux use "Linux PPF Patcher")

Tekken 6 UMD-PSN Working Patch

PPF Patch - Applying Instructions:
1) Make a backup copy of your ISO before applying this patch just in case something goes wrong.
2) Extract the PPF patches from the RAR file.
3) Start the program that can apply PPF patches to files.
4) In the 'ISO File' box of your program choose your Untouched Tekken 6 ISO.
5) In the 'Patch File' box of your program, choose the 'PPF Patch' that suits your version.
(If you are not too sure what version you have, look at the "Tekken 6 Version Check" section below.)

6) Click 'Apply patch' and the patch will be applied to your ISO.
7) Copy the patched ISO to your memory stick.


-------------------------------------------------------------------------


Convert 'Tekken 6' UMD version ISO into the PSN version ISO.

This just converts the 'UMD version' of the game to the 'PSN version' of the game.
Once you have converted your 'UMD Version' into the PSN version,
you can apply the working patch which is located at the top of this post.


PPF Patch: (Includes PPF-o-Matic for Windows)

Tekken 6 UMD to PSN

PPF Convert Instructions:
1) Make a copy of your original ISO (apply the patch to the copy)
2) Extract the PPF Patch into a new folder.
3) Open PPF-o-matic and in the ISO File box choose your 'Tekken 6 UMD version ISO'
4) in the Patch file box, choose the "Tekken6-UMDtoPSN-Patch.ppf" file.
5) Click Apply and your UMD Version will be changed into the PSN version.
6) Rename your new converted ISO so you know its the PSN version.


-------------------------------------------------------------------------


Tekken 6 Version Check

1. Open the ISO with UMDGEN (or winrar or any program that can open ISO files)
2. Go to the "PSP_GAME \ SYSDIR \ UPDATE" folder and check the size of the DATA.BIN file.

If the DATA.BIN file size is: 99614720 then you have the PSN version of the game.
If the DATA.BIN file size is: 23223168 then you have the UMD version of the game.


-------------------------------------------------------------------------


Manual Patch (Hexing) for Tekken 6 (USA)

1) Decrypt the PSN version of the game eboot.bin file using 'PRX Decryptor v2.3'

2) Open decrypted eboot.bin file in hex editor and patch these offsets.

Address : Decrypted to Patched
00001128: (Old: 05 05) to (New: 00 05)
// Line Above Patches the version check from 5.05 to 5.00.
00068580: (Old: 21 20 40 00) to (New: 46 01 64 34)
002771C0: (Old: 21 20 40 00) to (New: 46 01 64 34)
0029E9C4: (Old: 21 20 40 00) to (New: 46 01 64 34)

3) Save Patched eboot.bin

4) Open untouched ISO with a hex editor.

5) Go to offset 0x00110000 in the untouched ISO, the line should start with ~PSP.

6) Inject the patched eboot.bin file into the untouched ISO using overwrite mode.



All the credits goes to The__Android for his great patches and his great tutorial.

[arca15]

i have been trying to make this game work on my psp 5.03 MHU, i tried everything that was instructed in one website but to no avail until i searched google and found this thread and within 5mins i'm already playing tekken 6, that is why i decided to join this forum and thank you sir for this thread it works! very clear instructions so i wanted to thank you personally ... THANK YOU SO MUCH!!!!!!!!! THE BEST!!!! thanks to guys like you who doesn't leave us 5.03 MHU users! thanks keep it up! more power to QJ.net!!!!

[nickxab]

Hehehe thanks but like i said in the first post all the credits goes to The__Android. ;)

[arca15]

thanks also to The_Android.. for the same reason that you guys don't leave us MHU users hanging thanks! ^^
(i would not have find The_Android's post if it wasn't for you.. so credits to you for sharing his post lol ^^)

[dennison]

Thanks nick and The__Android, it works!

Here's a short YouTube video showing off Tekken 6 on my 5.00 M33-6 CFW:

[nickxab]

I fixed the youtube video. ;)
And i deleted the second post as spam.
You posted only a dot.

[thorn]

hi sir... why i cant find the patch for 5.03 mhu.. thanks

[nickxab]

hi sir... why i cant find the patch for 5.03 mhu.. thanks

Look in the Tekken 6 - Patch for 5.00 M33-6 and higher category. ;)

[thorn]

hi sir nic.. i've already did the steps.. but still i ended up with the black/blank screen.. the iso file is there. i can see it on my list of games but when i will start to play it.. it will leave in a black/blank screen.. stil i cant play t6 5.03 MHU firmware.. and my CFWenabler is 3.60.. thanks for helping

[arca15]

hi sir nic.. i've already did the steps.. but still i ended up with the black/blank screen.. the iso file is there. i can see it on my list of games but when i will start to play it.. it will leave in a black/blank screen.. stil i cant play t6 5.03 MHU firmware.. and my CFWenabler is 3.60.. thanks for helping

make sure that you adjust the UMD Mode: Sony NP9660
CPU Clock XMB: Default
CPU Clock Game: Default
you can access the menu by pressing select ^^ hope you'll be able to make it work coz i did, my psp is 5.03 MHU and 3.60 CFW same as yours ^^

[ian_eo]

does anyone have the same problem with me. i got to play 1 or 2 or 3 fights then when on "now loading" it got stuck. it is not consistent when i play it, sometimes it got stuck after 1 fight or 2 fight, etc. kindly help me please

[iamafreak]

does anyone have the same problem with me. i got to play 1 or 2 or 3 fights then when on "now loading" it got stuck. it is not consistent when i play it, sometimes it got stuck after 1 fight or 2 fight, etc. kindly help me please

remove ur memory stick and insert it back again...it may work.

[nickxab]

Well i found that in 5.00 m33 works with this settings too.
CPU Clock Game: Default
UMD ISO Mode: M33 Driver

does anyone have the same problem with me. i got to play 1 or 2 or 3 fights then when on "now loading" it got stuck. it is not consistent when i play it, sometimes it got stuck after 1 fight or 2 fight, etc. kindly help me please

It works fine for me.

[elite999]

The patch worked like a charm nickxab. :)

[nickxab]

I know.
I haven't got any problem.

[thorn]

thank arca.. its ok now.. and many thanks to nic.. now i can play t6.. do this work on 5.00 m33-4 thanks again

[nickxab]

You are welcomed Karlo

[arca15]

thank arca.. its ok now.. and many thanks to nic.. now i can play t6.. do this work on 5.00 m33-4 thanks again

your welcome Karlo ^^ Glad you'll be able to play ^^

[thorn]

it also works for m33-4 :)

[addictedtonoise]

Patch works! Thanks for the guide, nickxab!

[nickxab]

You are welcomed. ;)

[Bozzoc]

help me.. i do all the patch ..and the game starts fine.. but when the start movie ends and i
press 'start game' it stuck on that theres no game menu appears... help pls.. the game menu is not appearing..

[Bozzoc]

please help me... i cant play it.

[nickxab]

How you set up the settings in the vsh ?

[elite999]

nickxab, I also have his problem in Persona. I guess it is from the game backup.

[nickxab]

No, persona runs with Sony NP9660 driver only.

[elite999]

persona runs with Sony NP9660 driver only.

Lol, it doesn't even boot in that driver. ;)

[nickxab]

You must patch it and then to use the np decryptor.

[CoD3r-D]

Works!Thanks....

[DSPSP]

Yeah work with Vista thanks !!!!!!