Thank you, my PSP Slim is alive!
Would you like to get all the newest Gaming News from
QJ.NET in your email each day?
Want to learn more about the team who brings you the QJ news?
Read about them now!
This is a discussion on [GUIDE] Unbrick a PSP Slim or Classic. within the PSP Pandora Discussion forums, part of the PSP Development, Hacks, and Homebrew category; Thank you, my PSP Slim is alive! <3...
Thank you, my PSP Slim is alive!
My pleasure ;)
can u do this on the slim battery or do u have 2 do it on the old ones?
edit: sorry never mind
must be the old one.Originally Posted by AznBigBoiZ
btw: where did this pandora forum come from
can the old batteries run on the slim psp?
Originally Posted by AznBigBoiZ
Yes, I used an old battery to mod my new slim.
do u have 2 install pandora on the old psp?
You never actually install Pandora onto a PSP, rather, you create a kit that has a Magic Memory Stick and a JigKick Battery.
You need either an old fat psp or a slim with CFW. I would recommend using v3 (as covered in the guide) because that version will unbrick both fats and slims as well as let you put cfw on any PSP currently available.
I'm really not good at this sort of thing, and would like to be safe before attempting this. So, pardon me for asking this question.
In the "Getting Ready section", you're using the PSP w/ FW 1.5 right?
I'm using a PSP which is homebrew compatible, so this could be a PSP running firmware version:
You get the idea ;)
@Others: YOU NEED A CLASSIC PSP BATTERY TO USE THIS HACK.
you can use a slim battery too i thought??
Ok, after reading the readme again I noticed it does say 'For use with PSP and PSP Slim'.
Sorry, but waht to do when you put the ms then the battery, and the green light don´t stop blinking???
this thread is very helpful. keep it up guys! :)
-= Double Post =-
ei guys i just got confused. is this flexible to PHAT and SLIM? and also to all version of PHAT version? thanks!
Last edited by shadowcraven; 11-07-2007 at 07:59 PM. Reason: Automerged Doublepost
could you use the eboot for 3.52 m33 instead of 3.71?
also my classic psp in which i am running these apps is at 3.52 m33-4. if i run the v3 from my psp will it brick or update to 3.71?
I need some helps please.
I have CFW 3.40 OE-A and pandora ms. I want to upgrade it using "despertar cementerio" so i can use it on psp slim. I follow the steps. But when i turn on my psp while holding R button and select configuration to access "Game Folder Kernel" IT CLEARS THE SCREEN AND SHOWS NOTHING. this stops me to run "despertar cementerio", if i run it, it show "This program requires 2.71 or higher". Help me please!
Go to Recovery Mode > Advanced, then Enable USB(Flash1) and delete all the files. Then restart and go into Recovery Mode and try changing the Kernel.
I solve the problem by downgrading to 1.50 using my pandora and then back to 3.40.
Now i can see Configuration Menu. I change the kernel but the problem is still the same.
I try to do i again and i activate the wma and flash player and exit. Psp restart.
Then i try the App to run. IT RUNS NOW, Hehehe its weird. now i upgraded my psp to m33-2.
I hope this solution helps others.
Thanks to all. More power.
Last edited by kyle_abad; 11-17-2007 at 10:51 PM. Reason: Automerged Doublepost
alright...here's a situation:
I've already done everything, meaning I can unbrick, or downgrade any FAT psp...what if, I want to use my FAT Pandora's battery, to change the firmware of a slim, to 3.71 M33? Is the FAT battery compatible to the PSP Slim?
i did everything right and when i put in my mem stick and then the battery nothing happens.............and when i on the psp its normal ......plz help
Great guide guys.
But I'm trying to Unbrick this one FAT psp. I have a working Magic MS and a Jigkick Batt(pandoras setup) but when I put both MS and Batt in, only the orange light, and the power light comes on.
I remember seeing both greens and the orange popping up on the left side of the PSP when trying to unbrick. is this due to actuall hardware damage? anything to go past this part?
The link of 3.71 EBOOT's is not working. Can any one tell me a one can download?
if I use a nand-dump that is mine made using the pandora menu and then restore using it is it still dangerous?
no, aslong as it is yours it is fine ;)
good to know that cos somebody told me i might end up with bad NAND blocks and personally i dont wanna install 3.71 m33 all over again..and does it matter if I made the nand-dump with a custom theme?
ok..I did everything but when i try to run despertar cementerio under game it says game cannot be started 80020001. I'm on 1.50
80020001 = error you get when trying to run non-KXploited homebrew on 1.50.
Install a custom firmware first :)
[I fail @ life]
But I thought this guide was for 1.50 as well.. :Cry:
Aren't there two folders named despertar_cementerio - one with a %, one without?
[I fail @ life]