QJ.net Game Discussion - PSP, Xbox, Wii, PS3, PSP Homebrew, and PSP Guides

noi · 06-05-2009, 09:23 PM

i got PSP fat TA-082 version 1.50 firmware that cannot update USING original UPDATE even the PANDORA M33 cannot use. You can use only the v3 PANDORA to downgrade to 1.50 only, but you cannot update or use the NEW v8 despertar, it show only blink on power on then turn off. Do you have any idea on it.

O.T.
The PSP fat is working only in 1.50 firmware only, if i UPDATE to 3.71m33 it goes brick or dead.

**slasher101** · 06-05-2009, 10:26 PM

Use DC9, install 5.00m33-4 then update to -6

**joshob1987** · 06-05-2009, 10:51 PM

Just download pspgrader v8 from dl.qj.net or other site and use that. You just need the official 5.00 eboot and to hook up the usb on your psp and everything is done for you. Then disconnect your power cord and leave the memstick in the psp created using pspgrader and put your pandora battery in the psp and the system will turn on by itself and show a menu that will let you install 5.00 m33-6 and your done.

noi · 06-05-2009, 10:55 PM

nah you mean DC8 not DC9(volts

), as i said you cannot USE the NEW PANDORA v8..only v3 which has a 1.50 firmware and 3.71m33, but if i update it to 3.71m33 it goes bricked or dead. Anyway thanks for your reply.

**elite999** · 06-05-2009, 11:17 PM

You can use Hellcat's recovery flasher 1.60.When you finish downloading the program, transfer also the 5.00 EBOOT.PBP into the recovey folder. Since you have a 1.50 firmware, then you should use the 1.50 kernel version of the recovery flasher. Good luck!

noi · 06-05-2009, 11:26 PM

Quote:

Originally Posted by elite999

You can use Hellcat's recovery flasher 1.60.When you finish downloading the program, transfer also the 5.00 EBOOT.PBP into the recovey folder. Since you have a 1.50 firmware, then you should use the 1.50 kernel version of the recovery flasher. Good luck!

ooooppss, ok will try that. thanks for the fast reply.

noi · 06-06-2009, 08:20 PM

I test the hellcat recovery in 1.50 firmware, it is working fine, but the program will stop in the middle of the flashing, i also test for nand check, there is no bad sectors on it. Now i will undergo for HARDWARE repair, i will replace the NAND. Might have a problem on nand chip. Thanks for the reply guys, will post the result.

**elite999** · 06-07-2009, 11:31 AM

Your welcome anytime man, it is our job. Right nickxab! :-P. Anyways I hope the results will go fine, because hardware problems are a maze.

**slasher101** · 06-07-2009, 02:39 PM

Quote:

Originally Posted by elite999

Your welcome anytime man, it is our job. Right nickxab! :-P. Anyways I hope the results will go fine, because hardware problems are a maze.

Amen 2 that

noi · 07-04-2009, 01:51 AM

problem now solved, i replaced the NAND but it is the same problem i got. I ended to reball the CPU NEAR the NAND, reflash it again, then now its working in high version 5.0 m33. thanks for the reply on my post.

gracey

06-05-2009, 09:23 PM	#1
noi Join Date: Jul 2006 Posts: 19 Trader Feedback: 0	PSP Fat can't UPDATE i got PSP fat TA-082 version 1.50 firmware that cannot update USING original UPDATE even the PANDORA M33 cannot use. You can use only the v3 PANDORA to downgrade to 1.50 only, but you cannot update or use the NEW v8 despertar, it show only blink on power on then turn off. Do you have any idea on it. O.T. The PSP fat is working only in 1.50 firmware only, if i UPDATE to 3.71m33 it goes brick or dead.

06-05-2009, 10:26 PM	#2
slasher101 xMod. My Mood: Join Date: Oct 2008 Real First Name: Adam Location: Melbourne, Australia Just Played: ps3 Posts: 677 Blog Entries: 1 Trader Feedback: 0	Use DC9, install 5.00m33-4 then update to -6 __________________ I hate those monkeys ZOMG! -~Slasher~- http://i18.tinypic.com/4m848p5.gif

06-05-2009, 11:17 PM	#5
elite999 QJ's Satallite My Mood: Join Date: May 2008 Real First Name: Hassan Location: Black market Just Played: Monster Hunter Freedom U Posts: 4,330 Blog Entries: 7 Trader Feedback: 0	You can use Hellcat's recovery flasher 1.60.When you finish downloading the program, transfer also the 5.00 EBOOT.PBP into the recovey folder. Since you have a 1.50 firmware, then you should use the 1.50 kernel version of the recovery flasher. Good luck! __________________ Rules & Regulations: Forum Rules - Code of conduct - Privacy Policy CFW/Pandora Installation/Recovery: Universal CFW Installation Guide - Installing DDC8 - ChickHen R2/CFE/GEN Guide for all PSPs Renowned Threads: Play 6.XX games instantly - What to do with your CFW? - Homebrew Starter Guide

06-05-2009, 10:51 PM	#3
joshob1987 QJ Gamer Green Join Date: Sep 2008 Real First Name: Josh Location: Seattle, WA Posts: 131 Trader Feedback: 0	Just download pspgrader v8 from dl.qj.net or other site and use that. You just need the official 5.00 eboot and to hook up the usb on your psp and everything is done for you. Then disconnect your power cord and leave the memstick in the psp created using pspgrader and put your pandora battery in the psp and the system will turn on by itself and show a menu that will let you install 5.00 m33-6 and your done.

06-05-2009, 10:55 PM	#4
noi Join Date: Jul 2006 Posts: 19 Trader Feedback: 0	nah you mean DC8 not DC9(volts ), as i said you cannot USE the NEW PANDORA v8..only v3 which has a 1.50 firmware and 3.71m33, but if i update it to 3.71m33 it goes bricked or dead. Anyway thanks for your reply.

06-06-2009, 08:20 PM	#7
noi Join Date: Jul 2006 Posts: 19 Trader Feedback: 0	I test the hellcat recovery in 1.50 firmware, it is working fine, but the program will stop in the middle of the flashing, i also test for nand check, there is no bad sectors on it. Now i will undergo for HARDWARE repair, i will replace the NAND. Might have a problem on nand chip. Thanks for the reply guys, will post the result.

06-07-2009, 11:31 AM	#8
elite999 QJ's Satallite My Mood: Join Date: May 2008 Real First Name: Hassan Location: Black market Just Played: Monster Hunter Freedom U Posts: 4,330 Blog Entries: 7 Trader Feedback: 0	Your welcome anytime man, it is our job. Right nickxab! :-P. Anyways I hope the results will go fine, because hardware problems are a maze.

07-04-2009, 01:51 AM	#10
noi Join Date: Jul 2006 Posts: 19 Trader Feedback: 0	problem now solved, i replaced the NAND but it is the same problem i got. I ended to reball the CPU NEAR the NAND, reflash it again, then now its working in high version 5.0 m33. thanks for the reply on my post. gracey

QJ.net Game Discussion - PSP, Xbox, Wii, PS3, PSP Homebrew, and PSP Guides

PSP Fat can't UPDATE