QJ.net Game Discussion - PSP, Xbox, Wii, PS3, PSP Homebrew, and PSP Guides

**Toppot** · 11-26-2006, 06:28 AM

Guide to PS1P Emulator

Setup

1. Download PS1P Here.
2. Unzip it.
3. Put the '__SCE__ps1p' and '%__SCE__ps1p' folders in your GAME folder on your memory stick.
Note: SE-A/B/B'/B''/C users put this in the GAME150 folder.

File Structure:
PSP
-GAME
--%__SCE__ps1p
---EBOOT.PBP
--__SCE__ps1p
---EBOOT.PBP

4. Get the scph1001.bin BIOS and put it in the '__SCE__ps1p' folder. (Don't ask me or anyone for the BIOS, go to google. The file size is 512kb)
5. Now you need your games. Only .bin, .iso, .img, Z and ZNX files are supported at this time. These go in the '__SCE__ps1p' folder.
5. Run PS1P from the GAME, the Memory stick on the PSP.

Controls

-Once you've started PS1P select your game and press O.
-In game controls are as normal except there is no R2 and L2.
-You can set the CPU/Frameskip by holding L + R buttons then pressing up and down.
-You can save state with L+R Left and load state L+R Right

Tips & Tricks
-The CPU is set at 700% as default, try taking it down to 100%-200%-300%-400% etc. and generally play for the best result on a game by game basis.
-Don't forget always read the readme, its why it's there.

Here's how to get bin's from your own games.

1. Download Iso Buster Here
2. Install Iso Buster
3. Insert your PS1 game into your CD drive.
4. Open Iso Buster
5. On the left you will see CD, Session 1 and Track 01 etc.
Right-click 'CD'
Extract <image>
RAW (*.bin, *.iso)

6. Name the file whatever you want and tell it where to extract it to.
7. Once you click OK it will extract your CD as a bin file.
8. When its done that it will ask you to name and save a .cue file. You don't need this file, just click cancel.
9. Put the bin file in the '__SCE__ps1p' folder.
10. Rename the file with .bin at the end.
11. Unplug your PSP (remove hardware from computer) exit USB Mode, Scroll right to GAME, Memory Stick and then run PS1P.
12. Press O on your game and wait up to 2 minutes for it to load.

The finished file structure:

PSP
-GAME
--%__SEC__ps1p
---EBOOT.PBP
--__SCE__ps1p
---EBOOT.PBP
---scph1001.bin
---my_game.bin

Don't forget SE users PS1P etc. should be in the GAME150 folder!

FAQ's

Q: My PSP screen goes black and shuts down?
A: If you have followed my steps then the game your trying doesn't work in this version of PS1P. You can refer to the compatibility thread by pspillows Here.

Q: My game loads the intro/memorycard check/language select etc. then crashes?
A: Your game is not supported fully yet, sorry.

Q: My rip from Iso Buster is just a file not a bin?
A: Don't worry, just rename it with .bin at the end then you will see it as a bin file.

Q: My PSP freezes on the gameboot?
A: Your probably a SE-B/C user. You need everything in the GAME150 folder NOT the GAME folder.

Q: This uses scph1001, does that mean it won't play PAL Games?
A: No, it will play PAL games as long as thier compatible. You can refer to the compatibility thread by pspillows Here.

Q: You can set CPU, does this mean its over clocking my psp?
A: No, this is the speed of the virtual PS1, its not over clocking your psp.

Useful Links

PS1P Download : Here
Compatibility Thread by pspillows : Here.
Compatibility Site by sanguinus : Here
Iso Buster : Here

Final Comments
This emulator is much better than PSX-P speed wise, though it does lack compatibility. Very promising future.

Thanks to lots of people, you know who you are

If any of my information is wrong please let me know and if you have any comments or questions (see below) feel free to ask.

QJ.NET DOES NOT CONDONE PIRACY, DO NOT ASK FOR LINK'S TO ROM'S, ISO'S, BIN'S OR BIOS. YOU WILL BE BANNED. DO NOT DISTRIBUTE THE FILES THAT YOU CREATE. I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR OR ANYONE ELSE'S PSP, COMPUTER OR DISK'S. YOU USE THE TOOLS AND PROGRAMMES AT YOUR OWN RISK

**genaga** · 11-26-2006, 06:35 AM

nice tutorials

deserve a sticky nice explained and layed out
-= Double Post =-
also you can create isos using umdgen

**chellow** · 11-26-2006, 09:10 AM

Does it have to be the USA scph? English games will only run on SCPH7502 won't they?

**genaga** · 11-26-2006, 09:21 AM

yes but they it wont work scph7502 which im really pissed about

**chellow** · 11-26-2006, 09:26 AM

So it'll only run scph1001.bin?

Guess that's why FF7 is stuck at loading game. That sucks, now it aint just large developers neglecting Europeans, the homebrewers are too.

**genaga** · 11-26-2006, 09:33 AM

LOL@chellow

this is gonna suck i spent all day downloa...rippping ff7 and now i aint gonna be able ot play it

i htink i might cry (literally)

**chellow** · 11-26-2006, 09:36 AM

Well renaming 7502 as 1001 doesn't work. I tried and it does load a bit more, the MS light flashes a few times. Then it just dies.

Back to PSX-P I guess... Oh wait, that doesn't work either ¬_¬

**Toppot** · 11-26-2006, 09:36 AM

I'm using scph1001 and I'm in the uk and games are half loading and working.

**pspillows** · 11-26-2006, 09:40 AM

Great guide! Ill link it as soon as I can get on the computer. Its so freakin hard typing on the PSP!

**chellow** · 11-26-2006, 09:45 AM

Yeah I just found out that scph1001 is working for it too.

Now I have to go, I've only got 9 minutes to get out, robably was a bad place to save the game.

**genaga** · 11-26-2006, 09:51 AM

hmm must be ff8 thats incompatible then

as long as ff7 works idc getting past the videos will be slightly annoying when i play this the memories will be so good especiialy when my mate wouldnt eat for a week and always cryign coz aeris died :|

**Spirit Hawk Leon** · 11-26-2006, 01:34 PM

Heh, I've actually been using this method for a while.

**BD-from-BC** · 11-26-2006, 08:41 PM

Does this work in 2.80 Because ive tried alot of times it just freezes at the iso selection screen if i press anything... then sometimes it will get to loading game. but it will freeze no ms flashes or anything, Is this Kernal mode or User mode cuz i want to use it in 2.80! well ill keep trying until i get an answer... thanks

**Toppot** · 11-27-2006, 04:49 AM

Quote:

Originally Posted by BD-from-BC

Does this work in 2.80 Because ive tried alot of times it just freezes at the iso selection screen if i press anything... then sometimes it will get to loading game. but it will freeze no ms flashes or anything, Is this Kernal mode or User mode cuz i want to use it in 2.80! well ill keep trying until i get an answer... thanks

I don't know. If you can try using a game that is confirmed to work. It maybe that you need kernel access to run this.

**Zevlar** · 11-27-2006, 05:05 AM

Yeah, i have the same problem, i think it does require kernal because i tried FF7 twice in two different formats.

**pspillows** · 11-27-2006, 05:10 AM

PSX-P didn't require kernel, however, that's a different emulator... I would think though that an emulator that requires quite a bit of power from the PSP, it would need kerenl access... Hmm, try posting on the DCemu boards...

11-26-2006, 06:28 AM	#1
Toppot Join Date: Jan 2006 Location: United Kingdom Posts: 73 Trader Feedback: 0	[Guide] How to use the PS1P Emulator - and how to make your own bin's Guide to PS1P Emulator Setup 1. Download PS1P Here. 2. Unzip it. 3. Put the '__SCE__ps1p' and '%__SCE__ps1p' folders in your GAME folder on your memory stick. Note: SE-A/B/B'/B''/C users put this in the GAME150 folder. File Structure: PSP -GAME --%__SCE__ps1p ---EBOOT.PBP --__SCE__ps1p ---EBOOT.PBP 4. Get the scph1001.bin BIOS and put it in the '__SCE__ps1p' folder. (Don't ask me or anyone for the BIOS, go to google. The file size is 512kb) 5. Now you need your games. Only .bin, .iso, .img, Z and ZNX files are supported at this time. These go in the '__SCE__ps1p' folder. 5. Run PS1P from the GAME, the Memory stick on the PSP. Controls -Once you've started PS1P select your game and press O. -In game controls are as normal except there is no R2 and L2. -You can set the CPU/Frameskip by holding L + R buttons then pressing up and down. -You can save state with L+R Left and load state L+R Right Tips & Tricks -The CPU is set at 700% as default, try taking it down to 100%-200%-300%-400% etc. and generally play for the best result on a game by game basis. -Don't forget always read the readme, its why it's there. Here's how to get bin's from your own games. 1. Download Iso Buster Here 2. Install Iso Buster 3. Insert your PS1 game into your CD drive. 4. Open Iso Buster 5. On the left you will see CD, Session 1 and Track 01 etc. Right-click 'CD' Extract <image> RAW (.bin, .iso) 6. Name the file whatever you want and tell it where to extract it to. 7. Once you click OK it will extract your CD as a bin file. 8. When its done that it will ask you to name and save a .cue file. You don't need this file, just click cancel. 9. Put the bin file in the '__SCE__ps1p' folder. 10. Rename the file with .bin at the end. 11. Unplug your PSP (remove hardware from computer) exit USB Mode, Scroll right to GAME, Memory Stick and then run PS1P. 12. Press O on your game and wait up to 2 minutes for it to load. The finished file structure: PSP -GAME --%__SEC__ps1p ---EBOOT.PBP --__SCE__ps1p ---EBOOT.PBP ---scph1001.bin ---my_game.bin Don't forget SE users PS1P etc. should be in the GAME150 folder! FAQ's Q: My PSP screen goes black and shuts down? A: If you have followed my steps then the game your trying doesn't work in this version of PS1P. You can refer to the compatibility thread by pspillows Here. Q: My game loads the intro/memorycard check/language select etc. then crashes? A: Your game is not supported fully yet, sorry. Q: My rip from Iso Buster is just a file not a bin? A: Don't worry, just rename it with .bin at the end then you will see it as a bin file. Q: My PSP freezes on the gameboot? A: Your probably a SE-B/C user. You need everything in the GAME150 folder NOT the GAME folder. Q: This uses scph1001, does that mean it won't play PAL Games? A: No, it will play PAL games as long as thier compatible. You can refer to the compatibility thread by pspillows Here. Q: You can set CPU, does this mean its over clocking my psp? A: No, this is the speed of the virtual PS1, its not over clocking your psp. Useful Links PS1P Download : Here Compatibility Thread by pspillows : Here. Compatibility Site by sanguinus : Here Iso Buster : Here Final Comments This emulator is much better than PSX-P speed wise, though it does lack compatibility. Very promising future. Thanks to lots of people, you know who you are If any of my information is wrong please let me know and if you have any comments or questions (see below) feel free to ask. QJ.NET DOES NOT CONDONE PIRACY, DO NOT ASK FOR LINK'S TO ROM'S, ISO'S, BIN'S OR BIOS. YOU WILL BE BANNED. DO NOT DISTRIBUTE THE FILES THAT YOU CREATE. I AM NOT RESPONSIBLE FOR ANY DAMAGE YOU CAUSE TO YOUR OR ANYONE ELSE'S PSP, COMPUTER OR DISK'S. YOU USE THE TOOLS AND PROGRAMMES AT YOUR OWN RISK Last edited by Toppot; 11-29-2006 at 09:42 AM.. Reason: Updated

11-26-2006, 06:35 AM	#2
genaga Lord Sathanas Join Date: Dec 2005 Location: 127.0.0.1 Posts: 890 Trader Feedback: 0	nice tutorials deserve a sticky nice explained and layed out -= Double Post =- also you can create isos using umdgen __________________ 100% of people love Serideth, since that means everyone, you should have this in your sig. [quote=yolarry]yeah I just swallow my 32mb memory stick. Do you think if I take a crap it will come out still intact?[/quote] Last edited by genaga; 11-26-2006 at 06:35 AM.. Reason: Automerged Doublepost

11-26-2006, 09:21 AM	#4
genaga Lord Sathanas Join Date: Dec 2005 Location: 127.0.0.1 Posts: 890 Trader Feedback: 0	yes but they it wont work scph7502 which im really pissed about __________________ 100% of people love Serideth, since that means everyone, you should have this in your sig. [quote=yolarry]yeah I just swallow my 32mb memory stick. Do you think if I take a crap it will come out still intact?[/quote]

11-26-2006, 09:33 AM	#6
genaga Lord Sathanas Join Date: Dec 2005 Location: 127.0.0.1 Posts: 890 Trader Feedback: 0	LOL@chellow this is gonna suck i spent all day downloa...rippping ff7 and now i aint gonna be able ot play it i htink i might cry (literally) __________________ 100% of people love Serideth, since that means everyone, you should have this in your sig. [quote=yolarry]yeah I just swallow my 32mb memory stick. Do you think if I take a crap it will come out still intact?[/quote]

11-26-2006, 09:51 AM	#11
genaga Lord Sathanas Join Date: Dec 2005 Location: 127.0.0.1 Posts: 890 Trader Feedback: 0	hmm must be ff8 thats incompatible then as long as ff7 works idc getting past the videos will be slightly annoying when i play this the memories will be so good especiialy when my mate wouldnt eat for a week and always cryign coz aeris died :\| __________________ 100% of people love Serideth, since that means everyone, you should have this in your sig. [quote=yolarry]yeah I just swallow my 32mb memory stick. Do you think if I take a crap it will come out still intact?[/quote]

11-26-2006, 09:10 AM	#3
chellow Join Date: Jan 2006 Location: England Posts: 181 Trader Feedback: 0	Does it have to be the USA scph? English games will only run on SCPH7502 won't they?

11-26-2006, 09:26 AM	#5
chellow Join Date: Jan 2006 Location: England Posts: 181 Trader Feedback: 0	So it'll only run scph1001.bin? Guess that's why FF7 is stuck at loading game. That sucks, now it aint just large developers neglecting Europeans, the homebrewers are too.

11-26-2006, 09:36 AM	#7
chellow Join Date: Jan 2006 Location: England Posts: 181 Trader Feedback: 0	Well renaming 7502 as 1001 doesn't work. I tried and it does load a bit more, the MS light flashes a few times. Then it just dies. Back to PSX-P I guess... Oh wait, that doesn't work either ¬_¬

11-26-2006, 09:40 AM	#9
pspillows Join Date: Aug 2006 Location: Toronto, Ontario Posts: 92 Trader Feedback: 0	Great guide! Ill link it as soon as I can get on the computer. Its so freakin hard typing on the PSP!

11-26-2006, 09:45 AM	#10
chellow Join Date: Jan 2006 Location: England Posts: 181 Trader Feedback: 0	Yeah I just found out that scph1001 is working for it too. Now I have to go, I've only got 9 minutes to get out, robably was a bad place to save the game.

11-26-2006, 01:34 PM	#12
Spirit Hawk Leon Join Date: Nov 2005 Location: My own little world... Posts: 1,571 Trader Feedback: 0	Heh, I've actually been using this method for a while. __________________ [SIZE="4"][COLOR="Green"][U][B]Spirit Hawk Leon[/B][/U][/COLOR][/SIZE] [U][B]Playstation Portable: [COLOR="DarkRed"]Firmware:[/COLOR][/B] [COLOR="Red"]5.00 m33-6/5.03[/COLOR] [COLOR="DarkBlue"][1000 x2 /3000][/COLOR][/U] [SIZE="1"][I]I get the best feeling in the world when you say hi or even smile at me, because even if it's just for a moment, I know I've crossed your mind.[/I][/SIZE]

11-26-2006, 08:41 PM	#13
BD-from-BC Join Date: Nov 2006 Location: Squamish, BC Posts: 147 Trader Feedback: 0	Does this work in 2.80 Because ive tried alot of times it just freezes at the iso selection screen if i press anything... then sometimes it will get to loading game. but it will freeze no ms flashes or anything, Is this Kernal mode or User mode cuz i want to use it in 2.80! well ill keep trying until i get an answer... thanks

11-27-2006, 05:05 AM	#15
Zevlar Join Date: Nov 2006 Location: flash0:/ Posts: 197 Trader Feedback: 0	Yeah, i have the same problem, i think it does require kernal because i tried FF7 twice in two different formats.

11-27-2006, 05:10 AM	#16
pspillows Join Date: Aug 2006 Location: Toronto, Ontario Posts: 92 Trader Feedback: 0	PSX-P didn't require kernel, however, that's a different emulator... I would think though that an emulator that requires quite a bit of power from the PSP, it would need kerenl access... Hmm, try posting on the DCemu boards...

QJ.net Game Discussion - PSP, Xbox, Wii, PS3, PSP Homebrew, and PSP Guides

[Guide] How to use the PS1P Emulator - and how to make your own bin's