Wiikey2 ModChip Compatible with DMS, D2A, D2B, D2C, D2C-2 and D2E driver and it is stable and high quality.
How to install Wiikey2 Modchip :
1. Make sure you have removed DVD drive from the Wii
2.sticking the small square sticker to the back of the Wiikey2 chip and please notice : push down on the black plastic part of the wiiclip, evenly and firmly,otherwise the chip not functioning.If you have pushed the clip down correctly, there should be no gap between the green part of the dvd drive board and the black plastic of the wiiclip,just like this picture :
3.plug the drive back in, but don’t close it yet. (If you go to this process, First you need to place the protective cardboard over the top of the chip. Second,Remove the small tear off square carefully and place the remaining cardboard with the square hole sitting over the wiiclip.),just like the following picture :
Video Guide :