Xecuter NAND-X Now In Production
Xecuter presents the NAND-X & JTAG Connection Kit. Based on the proven and excellent NAND PRO USB Programmer designed by illustrious scene member Tiros, we have developed a very tight package that gives you everything you need without having to use any other parts or self-made cables and kits – and certainly without breaking the bank! Not only do we provide one of the fastest 360 NAND programmers currently available, but we have designed a very simple connection system using our popular and much used quicksolder PCB breakout boards. Also as a bonus we have integrated an expansion socket and an update port so you are able to update the firmware of the ARM Controller to make sure you can keep up to date with future new features, upgrades and add-ons. We have also included an optional pin header cable system just like the old XBOX LPC Days :) – so you can connect the NAND-X via quick solder pcb, pin header or use the color coded wires and solder straight to the 7 easy points.
We have also designed an easy to install JTAG Connection Kit that works on ALL Xbox 360 Motherboards – From Xenon thru to Jasper. Naturally if you want to JTAG your console it has to have a compatible dash / kernel version (The JTAG Connection Kits will also be sold separately for those that already have NAND programmers). A full range of tutorials and walk thrus will be available on our forums shortly.
Here is a brief run down of the NAND-X’s features:
* Fast USB 360 NAND Programming
* Rock Solid 60Mhz ARM Controller
* Easy Install System for both NAND and JTAG
* Includes Quick Solder Connection Kit For NAND
* Includes Quick Solder Connection Kit For JTAG Hack (All Version Motherboards)
* Includes Optional Pin Header Connection Kit For NAND
* Includes Optional Pin Header Connection Kit For JTAG Hack (All Version Motherboards)
* Built-in Programmer For Future NAND-X Firmware Upgrades (Windows App Available)
* Add-on Expansion Socket Included
* Proven Technology – Based On NAND Pro Design
* 100% Compatible with NAND Pro v2.0e
* Rock Solid Design – Tested by many JTAGER’S
* High Quality & Trusted Xecuter Design
* Complete with ALL cables required including USB
* Multiple NAND & JTAG Connection Kits Sold Separately for Bulk Installers (Will be cheap – like LT Switch)
* Affordable – We Provide You With More For Less !
Production has now begun so we expect delivery to arrive sometime in April. RRP is set at around £24.95 / $34.95 however a small number of resellers are offering a special pre-order promotional price of just £19.95 / $29.95 !!!
For those that have an interest in how projects like Nand-X evolve through the prototype stages – here is a fun chart we made for your reference – check out this image
* LT Switch v1.5 On Sale
This is the new Xecuter LT Switch v1.5 – the latest version in the best selling Xecuter LT Switch range.
Now Includes MULTI-R Function. It was discovered that a small number of Liteon drives would not dump the firmware with a 20 ohm resistor – but required an 18 Ohm or 22 Ohm resistor – so now you can select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms – this will work 99% of the time)
The installation is very simple and takes about 5 minutes if you have some small experience with a soldering iron. It has been tested with the latest Jungle Flasher 0.1.73. All Liteon drive versions have been tested with 100% Success (Including the troublesome Winbond IC). There is no need to remove the LT Switch after it has been installed – simply switch to normal mode and you are good to go. Even if you have to upgrade in the future – you don’t have to touch the switch again !
Don’t be fooled by more expensive copycat products. This is the only solution you need to do a very simple job. Remember this product follows the K.I.S.S engineering principle (KEEP IT SIMPLE STUPID) :)
You can read a review by Team Jungle HERE
* The Only Liteon Solution Recommended By Team Jungle !
* Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
* Easy & Simple Install – Install Once & Forget
* Enable / Disable Switch
* Multi-R Switch (18, 20, 22 Ohms)
* Supports both Winbond & MXIC Chipset
* On/Off LED
* Completely Undetectable
* No Need To Uninstall
* Works with ALL tools including the latest Jungle Flasher
* Full Installation Tutorial – CLICK HERE
Team Xecutor: http://team-xecuter.com